Datasheet

IVC-234GT
3
ADSL2+ Fallback
For ISPs providing ADSL broadband services, the IVC-234GT can support a downstream rate of up to 24Mbps and an upstream rate of 1Mbps with the
ADSL2+ technology. The IVC-234GT can also be directly switched over to VDSL2 after the network upgrade.
Easy and Flexible Installation
The IVC-234GT offers two operation modes, the client-side CPE and central-side CO, making any network applications easy and flexible. The CPE or CO
mode can be adjusted by using the built-in DIP switch. For point-to-point connection, one IVC-234GT in CPE mode and the other one in CO mode must be
set up as a pair of converters to perform the connection. This enables the administrator to efficiently manage the network over coaxial cable, making long-
distance transmission better.
Point-to-Point Application -- LAN to LAN Connection
One set of the IVC-234GT could be used to link two local Area networks that are located in different places. Through the coaxial cable, it could set up a
200/100Mbps asymmetric backbone, but one IVC-234GT must be Master (CO mode) and the other one is Slave (CPE mode).
Applications
PC PC
1
2
3
4
ON
1
2
3
4
ON
Ethernet over Coaxial
VDSL2 Coaxial Cable
VDSL2
Up to 1400m
LAN to LAN Connection
1000BASE-T UTP
LAN 1 LAN 2
IVC-234GT
(CO)
IVC-234GT
(CPE)
VDSL2