User Manual

15
PC PC
1
2
3
4
ON
1
2
3
4
ON
Ethernet over Coaxial
VDSL2 Coaxial Cable
VDSL2
Up to 1200m
LAN to LAN Connection
1000BASE-T UTP
LAN 1 LAN 2
IVC-234GT
(CO)
IVC-234GT
(CPE)
VDSL2
Connecting Standalone PC
Refer to the following procedures to set up the Industrial Ethernet
Extender LAN to LAN connection.
1. [LAN1] Set the Industrial Ethernet Extender at LAN 1 in the CO
mode from the DIP switch.
2. [LAN2] Set the Industrial Ethernet Extender at LAN 2 in the CPE
mode from the DIP switch.
3. Power on the Industrial Ethernet Extender CO and CPE at both sides
by connecting its power source.
4. Power, CO and CPE LEDs will illuminate correspondingly.
5. Connect coaxial cable from LAN1 IVC-234GT to VDSL BNC port of
the LAN2 IVC-234GT.
6. VDSL LNK LED will blink to illuminate at both Industrial Ethernet
Extenders.
7. Connect the IVC-234GT Ethernet LAN port to the other network
device via regular Cat.5 UTP cable.