User Manual

5.4 Wall-mount Plate Mounting

To install the Industrial Ethernet Extender on the wall, please follow the

instructions described below.

Step 1: Remove the DIN-rail bracket from the Industrial Ethernet

Extender with a screwdriver.

Step 2: Place the wall-mount plate on the rear panel of the Industrial

Ethernet Extender.

Step 3: Use the screws to screw the wall-mount plate on the

Industrial Ethernet Extender.

Step 4: Use the hook holes at the corners of the wall-mount plate to

hang the Industrial Ethernet Extender on the wall.

Step 5: To remove the wall-mount plate, reverse the steps above.