User's Manual

LoRa Node Controller
LN501 and LN1152
- 21 -
4.2 LoRaWAN setting
LoRaWAN setting is used for configuring the transmission parameters in LoRaWAN ® network.
Basic LoRaWAN Settings:
Go to “LoRaWAN -> Basic” of ToolBox software to configure join type, App EUI, App Key and other
information. You can also keep all settings by default.
Object Description
Device EUI
Unique ID of the device which can also be found on the label.
App EUI
Default App EUI is 24E124C0002A0001.
Application Port
The port is used for sending and receiving data; default port is
85.
Note: RS232 data will be transmitted via another port.
Working Mode
LN501: Class A and Class C are available;
LN1152: Class C.
Join Type
OTAA and ABP mode are available
Application Key
Appkey for OTAA mode; default is