User's Manual

LoRa Node Controller
LN501 and LN1152
- 24 -
4.3 Interface setting
LN501 and LN1152 support data collection by multiple interfaces including GPIOs, analog inputs and
serial ports. Besides, they can also power the terminal devices by power output interfaces. Basic
settings are as follows:
Go to “General -> Basic” of ToolBox software to change the reporting interval.
Object Description
Reporting Interval
Reporting interval of transmitting data to network server. Default:
20 mins, Range: 1-1080 mins.
Note: RS232 transmission will not follow the reporting interval.
Device Returning
Power Supply
State
If the device loses power and returns to power supply, the device
will be on or off according to this parameter.
Interface 1/2 3V3
Output
Enable 3.3V power output. After it is enabled, the power output
will supply power continuously.
Change Password
Change the password for ToolBox software to read/write this
device.