User's Manual

LoRa Node Controller
LN501 and LN1152
- 32 -
3. Select analog input type according to analog device type.
Make sure DIP switch has changed before changing “Analog Input Signal
Type” to 0-10V.
4. Enable “Interface 1 (Pin 1) 5V/9V/12V” and configure “Power Output Time Before Collect”,
LN501 will power the analog devices for a period of time before collecting data.
When you use power output to power analog devices, it only supplies power
when reporting interval is coming. It’s suggested to power slave devices with
external power during the PoC test.
5. Click “Fetch” to check if LN501 can read correct data from analog devices.