User's Manual

4. Installation

4.1 Installing Media Converter Chassis to 10/19-inch

Wiring Closet Rack

• Install four screws through mounting ears into each side

• Locate Converter Chassis at 10/19-inch mounting rails and screw up

the front brackets

• Se

t Main power switch at “OFF” position before connecting the power

cord

4.2 Installing Converters to the Media Converter Chassis

• Turn off the Converter Chassis power

• Verify the Media Converter is right for this Chassis and locate +5VDC

power jack on converter back, carefully slide in and plug to match

10”/19” Chassis slot +5V DC receptacle. Push up the picket fence to

lock the converters

Note

The slide-in Media Converters and Converter Chassis

should be supplied only from PLANET, both Media

Converters and Chassis are built to match each other

at dimensions, DC power jack, and DC receptacle and

power safety.

• Ensure that there is no activity in the network

• Connect the media cable for network connection

• Turn on the chassis power, the Power LED, and both FAN LED indica-

tors will light up