Datasheet

ManualsBrandsPLANET Technology ManualsIndustrial Automation1-port RS232/422/485 Modbus Gateway with 1-Port 100BASE-FX SFP

MG-110/MG-115A

1-port RS232/422/485 Modbus Gateway

Standard Modbus TCP/RTU/ASCII Network Integration

PLANET MG-11x 1-port RS232/422/485 Modbus Gateway Series supports the

standard Modbus Protocol, which makes it possible for converting any Modbus

Protocols between Modbus TCP, Modbus RTU, and Modbus ASCII for all supported

hardware interfaces. Its serial protocol can be used for industrial automation

where SCADA or HMI system is in place. Moreover, its network integration can be

upgraded from the SNMP network to the automated Modbus TCP network, which

brings interconnection over Ethernet longer distances, thus making a network

infrastructure more exible.

Serial Interface

• One DB9 interface supports RS232, 2-wire RS485, 4-wire

RS485 and RS422 standards

• Asynchronous serial data rates up to 921600bps

Ethernet Interface

• 1-port 10/100BASE-TX RJ45 or 100BASE-FX interface

with auto MDI/MDI-X function

• Ethernet ports support Ethernet switch or cascading

operation for easy wiring

Management Function

• Built-in IP-based Web interface and telnet interface for

remote management

• Software Protocol supports Modbus TCP, Modbus RTU,

Modbus ASCII, IP, ARP, DHCP and DNS

• Supports RTU Master, RTU Slave, ASCII Master, and

ASCII Slave four serial operation modes via management

interface

• Master mode supports 32 slave TCP connection requests

• Slave mode supports 32 TCP master connections

• PLANET Modbus Gateway utility for nding client device

on the network.

• PLANET Smart Discovery utility automatically nds the

client devices on the network

• Firmware upgrade/conguration backup and restore via

HTTP protocol

Case and Installation

• Compact size for easy Installation:

– Standalone - Wall mountable or DIN-rail mounting

(optional accessory)

– Co-works with PLANET media chassis (MC-700/1500)

• -10 to 60 degrees C operating temperature

• Reset button for resetting to factory default

A Conversion Bridge for Flexible Network Deployment

The MG-11x Series can be a conversion bridge between the equipment with the

Modbus RTU/ASCII Protocol and the administrator workstations that run the Modbus

TCP/IP Protocol. The RS232/422/485 serial interface of the MG-11x Series provides

the Modbus RTU/ASCII operation mode and various baud rate options to meet the

demand of integration between the Modbus TCP/IP Protocol, Modbus RTU Master/

Slave Protocol and Modbus ASCII Master/Slave Protocol.

RS485

RS232/RS422/RS485

MG-110

Workstation

with SCADA

Modbus TCP/IP

10/100TX UTP

32 TCP Slaves

RTU

Master

ASCII

Master

32 TCP Masters

RTU

Slave

ASCII

Slave

Modbus TCP/IP Ethernet RS232/RS422/RS485

Equipment

Serial Cable

RS232/422/485

Modbus Environment

100BASE-TX UTP

Summary of content (7 pages)

PAGE 1
MG-110/MG-115A 1-port RS232/422/485 Modbus Gateway Serial Interface • One DB9 interface supports RS232, 2-wire RS485, 4-wire RS485 and RS422 standards • Asynchronous serial data rates up to 921600bps Ethernet Interface • 1-port 10/100BASE-TX RJ45 or 100BASE-FX interface with auto MDI/MDI-X function Standard Modbus TCP/RTU/ASCII Network Integration PLANET MG-11x 1-port RS232/422/485 Modbus Gateway Series supports the standard Modbus Protocol, which makes it possible for converting any Modbus • Ethernet p
PAGE 2
MG-110/MG-115A The advantage of having the MG-11x Series is to assist users to build an environment between the Modbus TCP Protocol and the Modbus RTU/ASCII Protocol easily, thus offering an application solution to the control equipment without Ethernet ports, and the control equipment can only control through a PC workstation or control panel.
PAGE 3
MG-110/MG-115A Remote Management The MG-11x Series makes the connected Modbus RTU/ASCII equipment become IP-based facilities and is able to connect to the Modbus TCP/IP network via its R232/422/485 serial interface and 10/100BASE-TX RJ45 or 100BASE-FX Ethernet port. It provides a remote web management and telnet Interface for efficient remote network management.
PAGE 4
MG-110/MG-115A Applications RTU/ASCII Master to Multi Modbus TCP/IP Slaves The MG-11x Series can act as a bridge between the RTU/ASCII master equipment and the multi-TCP/IP slave equipment in a Modbus TCP/IP networking environment to control multi-TCP/IP slave equipment via the RTU/ASCII master equipment.
PAGE 5
MG-110/MG-115A Drawing ■ MG-110 26.20 10/100TX LNK/ ACT 70.30 PWR Serial 0 49.00 3.00 30.20 3.00 5.50 0 7.0 100FX SFP LNK/ ACT 70.30 PWR RS232/422/485 Modbus Gateway Serial 0 R1 .0 49.00 3.00 30.20 3.00 5.50 0 7.0 0 MG-115A RS232/422/485 Modbus Gateway 50.10 Unit: mm 5.50 .0 R1 50.10 Unit: mm 5.50 4.0 MG-110 RS232/422/485 Modbus Gateway RS232/422/485 Modbus Gateway 94.00 ■ MG-115A 26.20 94.00 5 4.
PAGE 6
MG-110/MG-115A Specifications Product MG-110 MG-115A Serial Interface Serial Port 1 x DB9 male RS232 Serial Standards RS422 4-wire RS485 2-wire RS485 Baud Rate (Data Rate) 50bps to 921Kbps Data Bits 5, 6, 7, 8 Stop Bit 1, 1.
PAGE 7
MG-110/MG-115A Windows-based Only: Windows XP Windows Server 2003 Virtual COM Utility Platform Supports Windows 7 Windows Server 2008 Windows 8 (Must install the latest version of WinPcap) Windows Server 2012 (Must install the latest version of WinPcap) Windows 10 Fault Alarm Record: System log / SNMP trap Time NTP Security Accessible IP (white list) SNMP SNMP v1 and v2c Standards Conformances Regulatory Compliance FCC Part 15 Class A, CE Certification Class A IEC60068-2-32 (Free fall) Stability