Datasheet

ManualsBrandsPLANET Technology ManualsIndustrial Automation2-port RS232/422/485 Modbus Gateway

MG-120

Standard Modbus TCP/RTU/ASCII Network Integration

PLANET MG-120 2-port RS232/422/485 Modbus Gateway supports the standard

Modbus Protocol, which makes it possible for converting any Modbus Protocols

between Modbus TCP, Modbus RTU, and Modbus ASCII for all supported

hardware interfaces. Its serial protocol can be used for industrial automation where

SCADA or HMI system is in place.

Moreover, its network integration can be upgraded from the SNMP network to the

automated Modbus TCP network, which brings interconnection over Ethernet longer

distances, thus making a network infrastructure more exible.

Serial Interface

• Two DB9 interfaces support RS232, 2-wire RS485, 4-wire

RS485 and RS422 standards

• Asynchronous serial data rates up to 921600bps

Ethernet Interface

• 1-port 10/100BASE-TX RJ45 with auto MDI/MDI-X function

Management Function

• Built-in IP-based Web interface and telnet interface for

remote management

• Software Protocol supports Modbus TCP, Modbus RTU,

Modbus ASCII, IP, ARP, DHCP and DNS

• Supports RTU Master, RTU Slave, ASCII Master, and

ASCII Slave four serial operation modes via management

interface

• Master mode supports 32 TCP slave connection requests

• Slave mode supports 32 TCP master connections

• PLANET Modbus Gateway utility for nding client device

on the network

• PLANET Smart Discovery utility automatically nds the

client devices on the network

• Firmware upgrade/conguration backup and restore via

HTTP protocol

Case and Installation

• -10 to 60 degrees C operating temperature

• Reset button for resetting to factory default

2-port RS232/422/485 Modbus Gateway

A Conversion Bridge for Flexible Network Deployment

The MG-120 can be a conversion bridge between the equipment with the Modbus

RTU/ASCII Protocol and the administrator workstations that run the Modbus TCP/IP

Protocol. The RS232/422/485 serial interface of the MG-120 provides the Modbus

RTU/ASCII operation mode and various baud rate options to meet the demand

of integration between the Modbus TCP/IP Protocol, Modbus RTU Master/Slave

Protocol and Modbus ASCII Master/Slave Protocol.

RS485

RS232/RS422/RS485

MG-120

Workstation

with SCADA

Modbus TCP/IP

10/100TX UTP

32 TCP Slaves

RTU

Master

ASCII

Master

32 TCP Masters

RTU

Slave

ASCII

Slave

Modbus TCP/IP Ethernet RS232/RS422/RS485

Modbus

Equipment

Serial Cable

RS232/422/485

100BASE-TX UTP

RJ45

LNK/ACT 100

Reset

5V , 2A max.

Summary of content (7 pages)

PAGE 1
MG-120 2-port RS232/422/485 Modbus Gateway Serial Interface • Two DB9 interfaces support RS232, 2-wire RS485, 4-wire RS485 and RS422 standards • Asynchronous serial data rates up to 921600bps Ethernet Interface • 1-port 10/100BASE-TX RJ45 with auto MDI/MDI-X function Standard Modbus TCP/RTU/ASCII Network Integration PLANET MG-120 2-port RS232/422/485 Modbus Gateway supports the standard Modbus Protocol, which makes it possible for converting any Modbus Protocols between Modbus TCP, Modbus RTU, and Modbus
PAGE 2
MG-120 The advantage of having the MG-120 is to assist users to build an environment between the Modbus TCP Protocol and the Modbus RTU/ASCII Protocol easily, thus offering an application solution to the control equipment without Ethernet ports, and the control equipment can only control through a PC workstation or control panel.
PAGE 3
MG-120 Applications RTU/ASCII Master to Multi Modbus TCP/IP Slaves The MG-120 can act as a bridge between the RTU/ASCII master equipment and the multi-TCP/IP slave equipment in a Modbus TCP/IP networking environment to control multi-TCP/IP slave equipment via the RTU/ASCII master equipment..
PAGE 4
MG-120 Product Specifications Product MG-120 Serial Interface Serial Ports 2 x DB9 male RS232 Serial Standards RS422 4-wire RS485 2-wire RS485 Baud Rate (Data Rate) 50bps to 921Kbps Data Bits 5, 6, 7, 8 Stop Bit 1, 1.
PAGE 5
MG-120 Windows-based Only: Windows XP Windows Server 2003 Virtual COM Utility Platform Supports Windows 7 Windows Server 2008 Windows 8 (Must install the latest version of WinPcap) Windows Server 2012 (Must install the latest version of WinPcap) Windows 10 Fault Alarm Record: System log / SNMP trap Time NTP Security Accessible IP (white list) SNMP SNMP v1 and v2c Standards Conformances Regulatory Compliance FCC Part 15 Class A, CE Certification Class A IEEE 802.3 10BASE-T IEEE 802.
PAGE 6
MG-120 Dimensions • MG-120 LNK/ACT Reset P1 70.30 MG-120 RS232/422/485 Modbus Gateway 100 26.20 P2 x x /R x/R PWR T P2 Tx 5V P1 , 2A max. RS232/422/485 Modbus Gateway 94.00 46.70 � 7.
PAGE 7
MG-120 Related Products MG-110 1-port RS232/422/485 Modbus Gateway (-10~60 degrees C) MG-115A 1-port RS232/422/485 Modbus Gateway with 1-port 100BASE-FX SFP (-10~60 degrees C) IMG-2100T IP30 Industrial 1-Port RS232/RS422/RS485 Modbus Gateway (1 x 10/100TX, -40~75 degrees C) IMG-2105AT IP30 Industrial 1-Port RS232/RS422/RS485 Modbus Gateway (1 x 100FX, -40~75 degrees C) IMG-2200T IP30 Industrial 2-Port RS232/RS422/RS485 Modbus Gateway (2 x 10/100TX, -40~75 degrees C, 2KV isolation) IMG-2400T IP30