MG-11x Series User Manual
Table Of Contents
User’s Manual of MG-11x Modbus Gateway Series
48
Figure 4-5-4: Disable Mode Screenshot
Buttons
: Click to apply port config changes.
When applying any configuration changes of Modbus Gateway, it’s required to
save changed
configuration and reboot system. Therefore the new configuration will be applied after rebooting.
4.5.2.2 RTU Slave mode
This function allows the users to use Modbus TCP master device and Modbus RTU device to achieve communication. The
operation mode of the Industrial Modbus Gateway is set to RTU Slave. The remote pair master/slave topology in Figure 4-5-5
appears.
Figure 4-5-5: RTU Slave Topology
The remote pair master mode screenshot in Figure 4-5-6 appears.