User's Manual

- 20 -
4. Installing SFP/SFP+/XFP Transceiver Module
4-1 Install the SFP/SFP+ Mini-GBIC Transceiver Module
Please follow these steps to install the SFP/SFP+ Mini-GBIC module:
1. Power on the Switch and place the Switch on a
at surface. Install the new SFP/SFP+ Mini-GBIC
module by inserting it into the slot and sliding it in
until it stops (See Figure 1). Press it rmly until you
hear the module snap into place. Never force, twist
or bend the SFP/SFP+ Mini-GBIC module. The
SFP/SFP+ Mini-GBIC module slides in smoothly
and the Switch will automatically detect the new
module.
SFP/SFP
+
Transceiver
Figure 1: Insert the SFP/SFP+ Mini-GBIC Module
2. After the TP/Fiber connection is made successfully, check the LEDs to verify that if there is a link and
a proper connection at the port.
Please refer to the user’s manual for more about the Switch or module’s management.