User's Manual

- 22 -
4-3 Remove the SFP/SFP+/XFP Transceiver Module
1. Make sure there is no network activity by consulting or checking with the network administrator.
2. Remove the Fiber Optic Cable gently.
3. Turn the handle of the SFP/SFP+/XFP Transceiver module to the horizontal level.
4. Pull out the SFP/SFP+/XFP Transceiver module gently through the handle.
1-Port 10G XFP Module
XGS3-XFP
Warning
Never pull out the SFP/SFP+/XFP Transceiver module without pulling the handle or the
push bolts on the module. Directly pulling out the SFP/SFP+/XFP Transceiver module
would damage the SFP/SFP+/XFP Transceiver module of the device.