Quick Guide

6
4. Terminal Setup
Tocongure the system,connecta serial cabletoaCOM portonaPC ornotebook
computerandtoRJ45typeofserialportoftheManagedMetroswitch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 4-1: Managed Metro Switch Console Connectivity
A terminal program is required to make the software connection to the Managed
Metro Switch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
Baud :115200
Databits :8
Parity :None
Stopbits :1
lowcontrol :None
Figure 4-2: COM Port Conguration