Quick Guide

8
6.ConguringIPAddressviaConsole
TheManagedMetroSwitchisshippedwithdefaultIPaddressshownbelow.
IPAddress:192.168.0.100
SubnetMask:255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
usetheproceduresasfollows:
 Show the current IP Address
1.Atthe“#”prompt,enter“show ip interface brief”.
2.ThescreendisplaysthecurrentIPaddressasshowninFigure6-1.
Figure 6-1: IP Information Screen
 Conguring IP Address
3.At the “#” prompt, enter the following command and press <Enter> as shown
in Figure 6-2.
MGSW-24160F# congure terminal
MGSW-24160F(cong)#interface vlan 1
MGSW-24160F(cong-if-vlan)#ip address 192.168.1.100 255.255.255.0