User's Manual

Command Guide
230
Example:
To exit current mode.
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# history size 1
4.2.103.9 length
Command:
length <0 or 3-512>
length Set number of lines on a screen
<0 or 3-512> Number of lines on screen (0 for no pausing)
Default:
None
Usage Guide:
To configure displayed lines on a screen.
Example:
To configure displayed lines on a screen.
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# length 10
4.2.103.10 location
Command:
location <LINE>
location Enter terminal location description
<LINE> One text line describing the terminal's location
Default:
None
Usage Guide:
To configure description of location.