User's Manual

Command Guide
246
Example:
To configure CC of MEP 1 as below table
Switch# configure terminal
Switch (config)# mep 1 cc 2 fr10s
4.2.126 mep <Instance> client domain
Command:
mep <Instance> client domain { evc | vlan }
mep Maintenance Entity Point
<Instance> The MEP instance number.
client Transport layer Client
evc EVC Domain.
vlan Vlan Domain
Default:
EVC
Usage Guide:
To configure Client Domain of MEP
Example:
To configure Client Domain (EVC) of MEP 1
Switch# configure terminal
Switch (config)# mep 1 client domain evc
4.2.127 mep <Instance> client flow
Command:
mep <Instance> client flow <cflow> level <level> [ ais-prio [ <aisprio> | ais-highest ] ]
[ lck-prio [ <lckprio> | lck-highest ] ]
mep Maintenance Entity Point
<Instance> The MEP instance number.
level The MEG level on the client layer