User's Manual

Command Guide
254
fr6h Frame rate is 6 f/hour.
fr6m Frame rate is 6 f/min.
dual Dual ended LM is based on CCM PDU.
single Single ended LM is based on LMM/LMR PDU.
multi OAM PDU is transmitted with multicast MAC.
uni OAM PDU is transmitted with unicast MAC. The MAC is taken from peer MEP MAC database. In case of LM
there is only one peer MEP.
flr The Frame Loss Ratio interval.
<Flr : uint> The Frame Loss Ratio interval value.
Default:
Usage Guide:
To configure Loss Measurement of MEP.
Example:
To configure Loss Measurement of MEP 2 as below table
Switch# configure terminal
Switch (config)# mep 2 lm 5 uni flr 4
4.2.138 mep <Instance> lt
Command:
mep <Instance> lt <prio> { { mep-id <mepid> } | { mac <mac> } } ttl <ttl>
mep Maintenance Entity Point
<Instance> The MEP instance number.
lt Link Trace
<Prio : 0-7> Priority in case of tagged OAM. In the EVC domain this is the COS-ID.
mac Link Trace target unicast MAC to be used in case of LT against MIP.
<Mac : mac_addr> Link Trace target unicast MAC value.
mep-id Peer MEP-ID for Link Trace target unicast MAC. The MAC is taken from peer MEP MAC database.
<Mepid : uint> Peer MEP-ID value.
ttl Time To Live.
<Ttl : uint> Time To Live value