User's Manual

Command Guide
260
Default:
0
Usage Guide:
To set VID of MEP.
Example:
To set VID (8) of MEP 1.
Switch# configure terminal
Switch (config)# mep 1 vid 8
4.2.146 mep <Instance> voe
Command:
mep <Instance> voe
mep Maintenance Entity Point
<Instance> The MEP instance number.
voe MEP is VOE based
Default:
0
Usage Guide:
To set VOE of MEP.
Example:
To set VOE (8) of MEP 1
Switch# configure terminal
Switch (config)# mep 1 voe
4.2.147 monitor destination
Command:
monitor destination interface 10GigabitEthernet <port_type_list> | GigabitEthernet
<port_type_list>
monitor Set monitor configuration
destination The destination port. That is the port that trafficked should be mirrored to