Datasheet

MGSW-24160F
2
–
Cisco ether-channel (static trunk)
–
Maximum 24 trunk groups, with 8 ports for each trunk
–
Up to 16Gbps bandwidth (full duplex mode)
• Provides port mirror (many-to-1)
• Portmirroringmonitorstheincomingoroutgoingtrafcona
particular port
• Loop protection to avoid broadcast loops
Layer 3 IP Routing Features
• Supports maximum 32 static routes and route
summarization
Quality of Service
• Ingress shaper and egress rate limit per port bandwidth
control
• 8 priority queues on all switch ports
• Trafcclassication
–
IEEE 802.1p CoS
–
ToS / DSCP / IP Precedence of IPv4/IPv6 packets
–
IP TCP/UDP port number
–
Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Trafc-policingpoliciesontheswitchport
• DSCP remarking
Multicast
• Supports IGMP snooping v1, v2 and v3
• Supports MLD snooping v1 and v2
• Querier mode support
• IGMPsnoopingportltering
• MLDsnoopingportltering
• MVR (Multicast VLAN Registration)
Security
• Authentication
–
IEEE 802.1x port-based / MAC-based network access
authentication
–
IEEE 802.1x authentication with guest VLAN
–
Built-in RADIUS client to cooperate with the RADIUS
servers
–
RADIUS / TACACS+ users access authentication
• Access Control List
–
IP-based Access Control List (ACL)
–
MAC-based Access Control List (ACL)
• Source MAC / IP address binding
• DHCPSnoopingtolterdistrustedDHCPmessages
AC and DC Redundant Power to Ensure Continuous Operation
The MGSW-24160F is equipped with one 100~240V AC power supply unit and one
additional 36~60V DC power supply unit for redundant power supply installation. A
redundant power system is also provided to enhance the reliability with either AC or DC
power supply unit. The redundant power system is specifically designed to handle the
demands of high-tech facilities requiring the highest power integrity. Furthermore, with
the 36~60V DC power supply implemented, the MGSW-24160F can be applied as the
telecom level device.
Effective Alarm Alert for Better Protection
The MGSW-24160F supports a Fault Alarm feature which can alert the users when
there is something wrong with the switches. With this ideal feature, the users would not
have to waste time to find where the problem is. It will help to save time and human
resource.
Enclosure
Door Detector
(Door Closed)
Door Detector
(Door Open)
Enclosure
AC Power
Failure
DC Power Failure
Fiber Cable
Link Down
System
Log
SNMP
TRAP
Mail
Digital Input
Digital Output
I/O
I/O
I/O
I/O
I/O
I/O
RJ45 Cable
Link Down
I/O
I/O
Security OK!! Alarm Warning Alarm Messaging
Digital Input and Digital Output for External Alarm
TheMGSW-24160Fhelpsthenetworkadministratorsefcientlymanagetheunexpected
network situations by providing Digital Input and Digital Output for external alarm device
on the front panel. The Digital Input can be used to detect and log the status of the
external devices such as door intrusion detector. The Digital Output could be used to
send alarm whenever the MGSW-24160F has port link-down or power failure.
IPv6 / IPv4 Dual Stack
Supporting both IPv6 and IPv4 protocols, the MGSW-24160F helps data centers,
campuses, telecoms, and more to experience the IPv6 era with the lowest investment
as its network facilities need not to be replaced or overhauled if the IPv6 FTTx edge
network is set up.
Layer 3 IPv4 and IPv6 VLAN Routing for Secure and Flexible Management
The MGSW-24160F switch not only provides ultra high transmission performance, and
excellent layer 2 and layer 4 technologies, but also layer 3 IPv4/IPv6 VLAN routing
feature which allows to crossover different VLANs and different IP addresses for the
purposeofhavingahighly-secured,exibly-managedandsimplenetworkingapplication.
AC Power Input
and Switch
Grounding
DC Power Switch
2 x DC Power Inputs
System / Port L.E.D.
2 x DI / DO
8 x 10/100/1000Base-T, RJ-45
Reset Button
16 x 100/1000Base-X SFP slot
RS-232 Console