Quick Guide

9
 CongureIPaddress
3. On “Switch/>” prompt, enter the following command and press <Enter>. As
showinFigure6-2.
Switch/> ip setup 192.168.1.100 255.255.255.0 192.168.1.1
ThepreviouscommandwouldapplythefollowsettingsfortheSwitch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
Figure 6-2: Set IP Address Screen
4.RepeatStep1tocheckiftheIPaddressischanged.
If the IP is successfully congured, the Managed Switch will apply the new IP
address setting immediately. You can access the Web interface of the Managed
SwitchthroughthenewIPaddress.
Note
Ifyoudonotfamiliarwithconsolecommand ortherelated param-
eter,enter“help”anytimeinconsoletogetthehelpdescription.