User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.2.1 System Information
- 4.2.2 IP Configuration
- 4.2.3 IP Status
- 4.2.4 Users Configuration
- 4.2.5 Privilege Levels
- 4.2.6 NTP Configuration
- 4.2.7 Time Configuration
- 4.2.8 UPnP
- 4.2.9 DHCP Relay
- 4.2.10 DHCP Relay Statistics
- 4.2.11 CPU Load
- 4.2.12 System Log
- 4.2.13 Detailed Log
- 4.2.14 Remote Syslog
- 4.2.15 SMTP Configuration
- 4.2.16 Digital Input/Output
- 4.2.17 Faulty Alarm
- 4.2.18 Web Firmware Upgrade
- 4.2.19 TFTP Firmware Upgrade
- 4.2.20 Save Startup Config
- 4.2.21 Configuration Download
- 4.2.22 Configuration Upload
- 4.2.23 Configuration Activate
- 4.2.24 Configuration Delete
- 4.2.25 Image Select
- 4.2.26 Factory Default
- 4.2.27 System Reboot
- 4.3 Simple Network Management Protocol
- 4.4 Port Management
- 4.5 Link Aggregation
- 4.6 VLAN
- 4.7 Spanning Tree Protocol
- 4.8 Multicast
- 4.8.1 IGMP Snooping
- 4.8.2 Profile Table
- 4.8.3 Address Entry
- 4.8.4 IGMP Snooping Configuration
- 4.8.5 IGMP Snooping VLAN Configuration
- 4.8.6 IGMP Group Port Group Filtering
- 4.8.7 IGMP Snooping Status
- 4.8.8 IGMP Group Information
- 4.8.9 IGMPv3 Information
- 4.8.10 MLD Snooping Configuration
- 4.8.11 MLD Snooping VLAN Configuration
- 4.8.12 MLD Snooping Port Group Filtering
- 4.8.13 MLD Snooping Status
- 4.8.14 MLD Group Information
- 4.8.15 MLDv2 Information
- 4.8.16 MVR (Multicaset VLAN Registration)
- 4.8.17 MVR Status
- 4.8.18 MVR Groups Information
- 4.8.19 MVR SFM Information
- 4.9 Quality of Service
- 4.9.1 Understand QOS
- 4.9.2 Port Policing
- 4.9.3 Port Shaping
- 4.9.4 Port Classification
- 4.9.5 Port Scheduler
- 4.9.6 Port Tag Remarking
- 4.9.7 Port DSCP
- 4.9.8 DSCP-Based QoS
- 4.9.9 DSCP Translation
- 4.9.10 DSCP Classification
- 4.9.11 QoS Control List
- 4.9.12 QoS Status
- 4.9.13 Storm Control Configuration
- 4.9.14 WRED
- 4.9.15 QoS Statistics
- 4.9.16 Voice VLAN Configuration
- 4.9.17 Voice VLAN OUI Table
- 4.10 Access Control Lists
- 4.11 Authentication
- 4.12 Security
- 4.12.1 Port Limit Control
- 4.12.2 Access Management
- 4.12.3 Access Management Statistics
- 4.12.4 HTTPs
- 4.12.5 SSH
- 4.12.6 Port Security Status
- 4.12.7 Port Security Detail
- 4.12.8 DHCP Snooping
- 4.12.9 DHCP Snooping Statistics
- 4.12.10 IP Source Guard Configuration
- 4.12.11 IP Source Guard Static Table
- 4.12.12 ARP Inspection
- 4.12.13 ARP Inspection Static Table
- 4.13 MAC Address Table
- 4.14 LLDP
- 4.15 Diagnostics
- 4.16 Loop Protection
- 4.17 RMON
- 4.18 PTP (MGSW-28240F Only)
- 4.19 Ring (For MGSD-10080F and MGSW-28240F)
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A
- APPENDIX B: GLOSSARY
- EC Declaration of Conformity
User’s Manual of MGSW-MGSD Series
1.5 Product Specifications
Product MGSD-10080F MGSW-24160F MGSW-28240F
Hardware Specifications
Hardware Version
V1.0 V3.0 V1.0
10Gbps Fiber Ports
--
--
4 1/10GBASE-SR/LR SFP+
slots
SFP/Mini-GBIC Slots
8 100/1000BASE-X SFP
Interfaces
16 100/1000BASE-X SFP
interfaces
24 100/1000BASE-X SFP
interfaces
Copper Ports
2 10/100/1000BASE-T
RJ45 Auto-MDI/MDI-X
Ports
8 10/100/1000BASE-T
RJ45 auto-MDI/MDI-X ports
4 10/100/1000BASE-T
RJ45 auto-MDI/MDI-X ports
Console Port
1 x RS-232 RJ45 serial port (115200, 8, N, 1)
Switch Architecture
Store-and-Forward
Switch Fabric
20Gbps, non-blocking
48Gbps, non-blocking
128Gbps, non-blocking
Throughput (Packet per second)
14.8Mpps @ 64Bytes
Packet
35.6Mpps@64Bytes
95.2Mpps@64Bytes
Address Table
8K entries
16K entries
16K entries
Shared Data Buffer
4M bits
16M bits
16M bits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame
9Kbytes
Reset Button
< 5 seconds: System reboot
> 10 seconds: Factory default
Connector
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Removable 6-pin terminal block for DI/DO interface
Pin 1/2 for DI 1 & 2; Pin 3/4 for DO 1 & 2; Pin 5/6 for GND
Dimensions (W x D x H)
330 x 155 x 43.5 mm, 1U
high
440 x 200 x 44.5 mm, 1U
height
440 x 200 x 44.5 mm, 1U
high
Weight 1661g
3kg
2.935kg
Power Consumption – AC
Max. 11.2 watts/38.2 BTU Max. 45 watts/154.4 BTU Max. 57 watts/197.6BTU
Power Consumption – DC
Max. 10.8 watts/36.9 BTU Max. 45 watts/154.4 BTU 57.6 watts/197.62 BTU
Power Requirements - AC
AC 100~240V, 50/60Hz
0.15A
AC 100~240V, 50/60Hz
0.75A
AC 100~240V, 50/60Hz
1.5A
Power Requirements - DC
36V DC @ 0.3A, Range:
36V ~ 60V DC
48V DC @ 1.1A, Range:
36V ~ 60V DC
36V DC @ 1.6A, Range:
36V ~ 60V DC
Alarm
One Relay Output for Power Failure. Alarm Relay Current Carry Ability: 1A @ DC 24V
DI & DO
2 Digital Input (DI): Level 0: -24V~2.1V (±0.1V)
Level 1: 2.1V~24V (±0.1V)
Input Load to 24V DC, 10mA max.
2 Digital Output (DO): Open Collector to 24VDC, 100mA max.
18