User's Manual

Table Of Contents
User’s Manual of MGSW-MGSD Series
V2 Reports Received
The number of Received V2 Reports.
The number of Receiv
ed V1 Leaves.
V1 Leave Received
Displa
y which ports act as router ports. A router port is a port on the Ethernet
switch that leads towards the Layer 3 multicast device or MLD querier.
Static denotes the specific port is configured to be a router port.
Dynamic denotes the specific port is learnt to be a router port.
Both denote the specific port is configured or learnt to be a router port.
Router Port
Sw
itch port number.
Port
Indicates w
hether specific port is a router port or not.
Status
Buttons
: Click to refresh the Page immediately.
: Clears all Statistics counters.
Auto-refresh : Automatic refresh occurs every 3 seconds.
4.8.14 MLD Group Information
Entries in the MLD Group Table are shown on this Page. The MLD Group Table is sorted first by VLAN ID, and then by group.
Each Page shows up to 99 entries from the MLD Group table, default being 20, selected through the "entries per Page" input
field. When first visited, the web Page will show the first 20 entries from the beginning of the MLD Group Table.
The "Start from VLAN", and "group" input fields allow the user to select the starting point in the MLD Group Table. The MLD
Groups Informatino screen in Figure 4-8-17 appears.
Figure 4-8-17: MLD Snooping Groups Information Page Screenshot
The Page includes the following fields:
189