User's Manual

User’s Manual of MGSW-MGSD Series
 ARP: The ACE will match ARP/RARP frames.
 IPv4: The ACE will match all IPv4 frames.
 IPv4/ICMP: The ACE will match IPv4 frames with ICMP protocol.
 IPv4/UDP: The ACE will match IPv4 frames with UDP protocol.
 IPv4/TCP: The ACE will match IPv4 frames with TCP protocol.
 IPv4/Other: The ACE will match IPv4 frames, which are not
ICMP/UDP/TCP.
 IPv6: The ACE will match all IPv6 standard frames.
 Action
Indicates the forwarding action of the ACE.
 Permit: Frames matching the ACE may be forwarded and learned.
 Deny: Frames matching the ACE are dropped.
Indicates the rate limiter n
umber of the ACE. The allowed range is 1 to 16. When
Disabled is displayed, the rate limiter operation is disabled.
 Rate Limiter
 Port Redirect
Indicates the port redirect operation of the ACE. Frames matching the ACE are
redirected to the port number.
The allowed values are Disabled or a specific port number. When Disabled is
displayed, the port redirect operation is disabled.
 Mirror
Specify the mirror operation of this port. The allowed values are:
 Enabled: Frames received on the port are mirrored.
 Disabled: Frames received on the port are not mirrored.
The default value is "Disabled".
Fo
rward packet that matched the specific ACE to CPU.
 CPU
Fo
rward first packet that matched the specific ACE to CPU.
 CPU Once
The counter in
dicates the number of times the ACE was hit by a frame.
 Counter
Indicates the h
ardware status of the specific ACE. The specific ACE is not
applied to the hardware due to hardware limitations.
 Conflict
Buttons
: Select the ACL status from this drop down list.
Auto-refresh
: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page immediate
230