Datasheet

3
MGSW-28240F
– IEEE 802.1x authentication with guest VLAN
– Built-in RADIUS client to cooperate with the RADIUS
servers
– RADIUS/TACACS+ users access authentication
• Access Control List
– IP-based Access Control List (ACL)
– MAC-based Access Control List (ACL)
• Source MAC/IP address binding
• DHCPSnooping to lter distrusted DHCP messages
• DynamicARPInspection discards ARP packets with invalid
MAC address to IP address binding
• IPSourceGuardprevents IP spoong attacks
• IP address access management to prevent unauthorized
intruder
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
– Console/Telnet command line interface
– Web switch management
– SNMP v1, v2c, and v3 switch management
– SSHv2 and TLSv1.2 secure access
• IPv6 address/NTP management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
– Firmware upload/download via HTTP/TFTP
– Reset button for system reboot or reset to factory default
– Dual images
• DHCP relay and option 82
• User privilege levels control
• NTP (Network Time Protocol)
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• Network diagnostic
– SFP-DDM (Digital Diagnostic Monitor)
– Cable diagnostic technology provides the mechanism to
detect and report potential cabling issues
– ICMPv6/ICMPv4 remote ping
• SMTP/Syslog remote alarm
• Four RMON groups (history, statistics, alarms and events)
• SNMP trap for interface link up and link down notication
• System Log
• PLANET Smart Discovery Utility for deployment management
AC and DC Redundant Power to Ensure Continuous Operation
The MGSW-28240F possesses a 100~240V AC power supply and dual 36~60V
DC power supply utilized as redundant power supply to ensure its continuous
operation. Its redundant power system is specifically designed to handle the
demands of high-tech facilities requiring the highest power integrity. Furthermore,
with the 36~60V DC power supply implemented, the MGSW-28240F can be
applied as the telecom level device and placed in almost any difcult environment.
Digital Input and Digital Output for External Alarm
The MGSW-28240F helps the network administrators efficiently manage the
unexpected network situations by providing Digital Input and Digital Output for
external alarm device on the front panel. The Digital Input can be used to detect
and log the status of the external devices such as door intrusion detector. The
Digital Output could be used to send alarm whenever the MGSW-28240F has port
link-down or power failure.
1000BASE-SX/LX Fiber Optic
1000
Control Center
ERPS Ring for Metropolitan
Area Network Application
Recovery Time < 10ms
Office
Highway
Factory
MGSW-28240F
Industrial MAN Switch
8-Port MAN Switch
1000
1000
1000
1000
1000
Industrial
PoE
+
Switch
Industrial
PoE
+
Switch
1000BASE-T UTP with PoE
PoE
PoE
PoE
Alarm MessagingAlarm WarningSecurity OK!!
Digital Output
Enclosure
Door Detector
(Door Closed)
Door Detector
(Door Open)
Enclosure
Digital Input
RJ45 Cable
Link Down
Fiber Cable
Link Down
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
System
Log
SNMP
TRAP
Mail
AC Power
Failure
DC Power Failure
I/O
I/O
I/O
I/O