MGSW-28240F(V3) Datasheet

MGSW-28240F
2
– Up to 256 VLANs groups, out of 4096 VLAN IDs
– Provides Bridging (VLAN Q-in-Q) support (IEEE
802.1ad)
– Private VLAN Edge (PVE)
– Protocol-based VLAN
– MAC-based VLAN
– IP subnet-based VLAN
– Voice VLAN
– GVRP
• Supports SpanningTreeProtocol
– IEEE 802.1D Spanning Tree Protocol (STP)
– IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
– IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
– BPDU Guard
• Supports LinkAggregation
– 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (static trunk)
– Maximum 14 trunk groups, with 16 ports for each
trunk group
– Up to 32Gbps bandwidth (full duplex mode)
• Provides port mirror (many-to-1)
• Portmirroringmonitorstheincomingoroutgoingtrafc
on a particular port
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
• IEEE 1588 and Synchronous Ethernet network timing
Quality of Service
• Ingress Shaper and Egress Rate Limit per port
bandwidth control
• 8 priority queues on all switch ports
• Trafcclassication
– IEEE 802.1p CoS
– TOS/DSCP/IP Precedence of IPv4/IPv6 packets
– IP TCP/UDP port number
– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Supports QoS and In/Out bandwidth control on each port
• Trafc-policingontheswitchport
• DSCP remarking
1000
1000
1000
1000
1000
PoE
Industrial
PoE Switch
Industrial
PoE Switch
PoE
MGSW-28240F
8-Port MAN Switch
Industrial MAN Switch
Factory
Highway
Office
Control Center
E.R.P.S. Ring for Metropolitan Area Network Application
Recovery Time < 10ms
Cybersecurity Network Solution to Minimize Security Risks
The cybersecurity feature included to protect the switch management in a mission-
critical network virtually needs no effort and cost to install. For efficient management,
the MGSW-28240F is equipped with console, web and SNMP management interfaces.
With the built-in web-based management interface, the MGSW-28240F offers an easy-
to-use,platform-independentmanagementandcongurationfacility.TheMGSW-28240F
supports SNMP and it can be managed via any management software based on the
standard SNMP protocol. For reducing product learning time, the MGSW-28240F offers
Cisco-like command via Telnet or console port and customer doesn’t need to learn new
command from these switches. Moreover, the MGSW-28240F offers remote secure
management by supporting SSH, SSL and SNMP v3 connection which can encrypt the
packet content at each session.
Redundant Ring, Fast Recovery for Critical Network Applications
The MGSW-28240F supports redundant ring technology and features strong, rapid
self-recovery capability to prevent interruptions and external intrusions. It incorporates
advanced ITU-TG.8032ERPS(EthernetRingProtectionSwitching) technology,
Spanning Tree Protocol (802.1s MSTP), and redundant power input system into
customer’s industrial automation network to enhance system reliability and uptime in
harsh factory environments. In a certain, simple Ring network, the recovery time of data
link can be as fast as 10ms.
1588 Time Protocol and Front-access Interface Design
The MGSW-28240F is ideal for telecom and carrier Ethernet applications, supporting
MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous
Ethernet. The Switch comes with a user-friendly front-access design to help technicians
improve wiring and installation efficiency, whereas, in the traditional design, the power
socket, console port and even some extension module were always placed on the rear
of the product. When technicians are installing or maintaining the older switch model
on the rack, they have to be careful with other surrounding online devices as the rear-
end of the product cannot be seen clearly. With the front-access design, technicians can
avoid messing with other nearby devices.