MGSW-28240F(V3) Datasheet

MGSW-28240F
3
Multicast
• Supports IGMP snooping v1, v2 and v3
• Supports MLD snooping v1 and v2
• Querier mode support
• IGMPsnoopingportltering
• MLDsnoopingportltering
• MVR (Multicast VLAN Registration)
Security
• Authentication
– IEEE 802.1x port-based/MAC-based network access
authentication
– IEEE 802.1x authentication with guest VLAN
– Built-in RADIUS client to cooperate with the RADIUS
servers
– RADIUS/TACACS+ users access authentication
• Access Control List
– IP-based Access Control List (ACL)
– MAC-based Access Control List (ACL)
• Source MAC/IP address binding
• DHCPSnoopingtolterdistrustedDHCPmessages
• DynamicARPInspection discards ARP packets with
invalid MAC address to IP address binding
• IPSourceGuardpreventsIPspoongattacks
• IP address access management to prevent
unauthorized intruder
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
– Console/Telnet command line interface
– Web switch management
– SNMP v1, v2c, and v3 switch management
– SSH/SSL secure access
• IPv6 address/NTP management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
– Firmware upload/download via HTTP/TFTP
– Reset button for system reboot or reset to factory
default
– Dual images
• DHCP relay and option 82
• User privilege levels control
• NTP (Network Time Protocol)
AC and DC Redundant Power to Ensure Continuous Operation
The MGSW-28240F possesses a 100~240VACpower supply and dual 36~60VDC
power supply utilized as redundant power supply to ensure its continuous operation. Its
redundant power system is specifically designed to handle the demands of high-tech
facilities requiring the highest power integrity. Furthermore, with the 36~60V DC power
supply implemented, the MGSW-28240F can be applied as the telecomlevel device
andplacedinalmostanydifcultenvironment.
Digital Input and Digital Output for External Alarm
TheMGSW-28240Fhelpsthenetworkadministratorsefcientlymanagetheunexpected
network situations by providing Digital Input and Digital Output for external alarm device
on the front panel. The Digital Input can be used to detect and log the status of the
external devices such as door intrusion detector. The Digital Output could be used to
send alarm whenever the MGSW-28240F has port link-down or power failure.
Digital Output
AC Power
Failure
DC Power Failure
I/O
I/O
RJ45 Cable
Link Down
Fiber Cable
Link Down
I/O
I/O
Enclosure
Door Detector
(Door Closed)
Door Detector
(Door Open)
Enclosure
System
Log
SNMP
TRAP
Mail
Digital Input
Security OK Alarm Warning Alarm Messaging
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
IPv6/IPv4 Dual Stack and Layer 2 Capability
Supporting both IPv6 and IPv4 protocols, the MGSW-28240F helps data centers,
campuses, telecoms, and more to experience the IPv6 era with the lowest investment
as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge
network is set up. The MGSW-28240F can be programmed for advanced switch
management functions such as dynamic port link aggregation, Q-in-QVLAN, private
VLAN, MultipleSpanningTreeProtocol(MSTP), Layer 2 to Layer 4 QoS, bandwidth
control and IGMP/MLDSnooping. Via the link aggregation of supporting ports, the
MGSW-28240Fallowstheoperationofahigh-speedtrunktocombinewithmultipleber
ports and supports fail-over as well.
LACPMSTP
Q-in-Q LLDPQoS
MLD
IGMP
L2/L4
ManagedSwitch
L2/L4
ManagedSwitch