User's Manual

Command Guide
-202-
4.2.73.21 ntp-server
Command:
ntp-server <A.B.C.D>
ntp-server NTP servers
<A.B.C.D> Server's IP address
Default:
None
Usage Guide:
To configure NTP Server of DHCP Server
Example:
To configure NTP Server (1.1.1.1) of DHCP Server for pool “planetbestswitch”
Switch# configure terminal
Switch (config)# ip dhcp pool planetbestswitch
Switch (config-dhcp-pool)# ntp-server 1.1.1.1
4.2.73.22 vendor
Command:
vendor class-identifier <”0x “> specific-info <HEX-VALUE>
vendor Vendor configuration
class-identifier Vendor class identifier
"<0x >" Class identifier in 64 characters
specific-info Vendor specific information
<HEX-VALUE> Hex values in 64 octets
Default:
None
Usage Guide:
To configure Vendor ID and info of DHCP Server
Example:
To configure Vendor ID and info as below table of DHCP Server for pool “planetbestswitch”