User's Manual

Table Of Contents
Command Guide
-236-
transmission-delay Sets LLDP transmission-delay. LLDP transmission delay (the amount of time that the
transmission of LLDP frames will delayed after LLDP configuration has changed) in seconds.)
<1-8192> 1-8192 seconds.
Default:
2
Usage Guide:
To configure Tx transmission-delay time of LLDP
Example:
To configure Tx transmission-delay time (88) of LLDP
Switch# configure terminal
Switch (config)# lldp transmission-delay 88
4.2.115 logging host
Command:
logging host <hostname> | <ipv4_ucast>
logging Syslog
host host
<hostname> Domain name of the log server
<ipv4_ucast> IP address of the log server
Default:
0
Usage Guide:
To configure address of log server
Example:
To configure address of log server
Switch# configure terminal
Switch (config)# logging host 192.168.5.5
4.2.116 logging level
Command:
logging level error | info | warning
logging Syslog