User's Manual
Table Of Contents
- Chapter 1 COMMAND LINE INTERFACE
- Chapter 2 CONSOLE CLI MANAGEMENT
- Chapter 3 TELNET CLI MANAGEMENT
- Chapter 4 Commands for CLI Configuration
- 4.1 clear
- 4.1.1 clear access management statistics
- 4.1.2 clear access-list ace statistics
- 4.1.3 clear dot1x statistics interface
- 4.1.4 clear eps
- 4.1.5 clear erps
- 4.1.6 clear erps statistics
- 4.1.7 clear evc statistics
- 4.1.8 clear ip arp
- 4.1.9 clear ip dhcp detailed statistics all
- 4.1.10 clear ip dhcp detailed statistics client
- 4.1.11 clear ip dhcp detailed statistics helper
- 4.1.12 clear ip dhcp detailed statistics server
- 4.1.13 clear ip dhcp detailed statistics snooping
- 4.1.14 clear ip dhcp relay statistics
- 4.1.15 clear ip dhcp server binding
- 4.1.16 clear ip dhcp server binding automatic
- 4.1.17 clear ip dhcp server binding expired
- 4.1.18 clear ip dhcp server binding manual
- 4.1.19 clear ip igmp snooping statistics
- 4.1.20 clear ip igmp snooping vlan
- 4.1.21 clear ip statistics icmp icmp-msg
- 4.1.22 clear ip statistics icmp interface vlan
- 4.1.23 clear ip statistics system icmp icmp-msg
- 4.1.24 clear ip statistics system icmp interface vlan
- 4.1.25 clear ipv6 mld snooping statistics
- 4.1.26 clear ipv6 mld snooping vlan
- 4.1.27 clear ipv6 neighbors
- 4.1.28 clear ipv6 statistics icmp icmp-msg
- 4.1.29 clear ipv6 statistics icmp interface vlan
- 4.1.30 clear ipv6 statistics system icmp icmp-msg
- 4.1.31 clear ipv6 statistics system icmp interface vlan
- 4.1.32 clear lacp statistics
- 4.1.33 clear lldp statistics
- 4.1.34 clear logging error info
- 4.1.35 clear logging error warning
- 4.1.36 clear logging info error
- 4.1.37 clear logging info warning
- 4.1.38 clear logging warning error
- 4.1.39 clear logging warning info
- 4.1.40 clear mac address-table
- 4.1.41 clear mep
- 4.1.42 clear mvr name
- 4.1.43 clear mvr statistics
- 4.1.44 clear mvr vlan
- 4.1.45 clear network-clock clk-source
- 4.1.46 clear spanning-tree detected-protocols interface *
- 4.1.47 clear spanning-tree detected-protocols interface *
- 4.1.48 clear spanning-tree detected-protocols interface GigabitEthernet
- 4.1.49 clear spanning-tree detected-protocols interface 10GigabitEthernet
- 4.1.50 clear spanning-tree statistics interface *
- 4.1.51 clear spanning-tree statistics interface GigabitEthernet
- 4.1.52 clear spanning-tree statistics interface 10GigabitEthernet
- 4.1.53 clear statistics *
- 4.1.54 clear statistics GigabitEthernet
- 4.1.55 clear statistics 10GigabitEthernet
- 4.2 configure terminal
- 4.2.1 aaa authentication login console local
- 4.2.2 aaa authentication login console radius
- 4.2.3 aaa authentication login console tacacs
- 4.2.4 aaa authentication login http local
- 4.2.5 aaa authentication login http radius
- 4.2.6 aaa authentication login http tacacs
- 4.2.7 aaa authentication login ssh local
- 4.2.8 aaa authentication login ssh radius
- 4.2.9 aaa authentication login ssh tacacs
- 4.2.10 aaa authentication login telnet local
- 4.2.11 aaa authentication login telnet radius
- 4.2.12 aaa authentication login telnet tacacs
- 4.2.13 access management
- 4.2.14 access-list ace
- 4.2.15 access-list ace update
- 4.2.16 access-list rate-limiter
- 4.2.17 access-list rate-limiter pps
- 4.2.18 aggregation mode
- 4.2.19 aggregation mode
- 4.2.20 banner
- 4.2.21 banner exec
- 4.2.22 banner login
- 4.2.23 banner motd
- 4.2.24 clock summer-time
- 4.2.25 clock time zone
- 4.2.26 default access-list rate-limiter
- 4.2.27 dot1x authentication timer inactivity
- 4.2.28 dot1x authentication timer re-authenticate
- 4.2.29 dot1x feature
- 4.2.30 dot1x guest-vlan
- 4.2.31 dot1x guest-vlan supplicant
- 4.2.32 dot1x max-reauth-req
- 4.2.33 dot1x system-auth-control
- 4.2.34 dot1x timeout quiet-period
- 4.2.35 dot1x timeout tx-period
- 4.2.36 enable password
- 4.2.37 enable password level
- 4.2.38 enable secret
- 4.2.39 end
- 4.2.40 erps <1-64> guard
- 4.2.41 erps <1-64> holdoff
- 4.2.42 erps <1-64> major
- 4.2.43 erps <1-64> mep
- 4.2.44 erps <1-64> mep
- 4.2.45 erps <1-64> rpl neighbor
- 4.2.46 erps <1-64> rpl owner
- 4.2.47 erps <1-64> sub
- 4.2.48 erps <1-64> topology-change propagate
- 4.2.49 erps <1-64> topology-change propagate
- 4.2.50 erps <1-64> vlan
- 4.2.51 evc
- 4.2.52 evc ece
- 4.2.53 evc ece update
- 4.2.54 evc policer
- 4.2.55 evc policer update
- 4.2.56 evc update
- 4.2.57 exit
- 4.2.58 green-ethernet led interval
- 4.2.59 green-ethernet led on-event
- 4.2.60 gvrp
- 4.2.61 gvrp max-vlans
- 4.2.62 gvrp time
- 4.2.63 help
- 4.2.64 hostname
- 4.2.65 interface * | 10GigabitEthernet | GigabitEthernet
- 4.2.65.1 access-list action permit
- 4.2.65.2 access-list action deny
- 4.2.65.3 access-list logging
- 4.2.65.4 access-list policy
- 4.2.65.5 access-list port-state
- 4.2.65.6 access-list rate-limiter
- 4.2.65.7 access-list redirect interface
- 4.2.65.8 access-list shutdown
- 4.2.65.9 aggregation group
- 4.2.65.10 description
- 4.2.65.11 do
- 4.2.65.12 dot1x guest-vlan
- 4.2.65.13 dot1x port-control
- 4.2.65.14 dot1x radius-qos
- 4.2.65.15 dot1x radius-vlan
- 4.2.65.16 dot1x re-authenticate
- 4.2.65.17 duplex
- 4.2.65.18 end
- 4.2.65.19 evc dei
- 4.2.65.20 evc l2cp discard(GG)
- 4.2.65.21 evc l2cp forward(GG)
- 4.2.65.22 evc l2cp peer(GG)
- 4.2.65.23 evc update dei
- 4.2.65.24 excessive-restart
- 4.2.65.25 exit
- 4.2.65.26 flow control
- 4.2.65.27 green-ethernet energy-detect(GG)
- 4.2.65.28 green-ethernet short-reach(GG)
- 4.2.65.29 gvrp join-request vlan(GG)
- 4.2.65.30 gvrp leave-request vlan(GG)
- 4.2.65.31 ip arp inspection check-vlan
- 4.2.65.32 ip arp inspection logging
- 4.2.65.33 ip arp inspection trust
- 4.2.65.34 ip dhcp snooping trust
- 4.2.65.35 ip igmp snooping filter
- 4.2.65.36 ip igmp snooping immediate-leave
- 4.2.65.37 ip igmp snooping max-groups
- 4.2.65.38 ip igmp snooping mrouter
- 4.2.65.39 ip verify source
- 4.2.65.40 ip verify source limit
- 4.2.65.41 ipv6 mld snooping filter
- 4.2.65.42 ipv6 mld snooping immediate-leave
- 4.2.65.43 ipv6 mld snooping max-groups
- 4.2.65.44 ipv6 mld snooping mrouter
- 4.2.65.45 lacp
- 4.2.65.46 lacp key
- 4.2.65.47 lacp port-priority
- 4.2.65.48 lacp role
- 4.2.65.49 lacp timeout
- 4.2.65.50 lldp cdp-aware
- 4.2.65.51 lldp med media-vlan policy-list
- 4.2.65.52 lldp med transmit-tlv
- 4.2.65.53 lldp receive
- 4.2.65.54 lldp tlv-select management-address
- 4.2.65.55 lldp tlv-select port-description
- 4.2.65.56 lldp tlv-select system-capabilities
- 4.2.65.57 lldp tlv-select system-description
- 4.2.65.58 lldp tlv-select system-name
- 4.2.65.59 lldp transmit
- 4.2.65.60 loop-protect
- 4.2.65.61 loop-protect action
- 4.2.65.62 loop-protect tx-mode
- 4.2.65.63 loop-protect tx-mode
- 4.2.65.64 mac address-table learning
- 4.2.65.65 media-type
- 4.2.65.66 mtu
- 4.2.65.67 mvr immediate-leave
- 4.2.65.68 mvr name
- 4.2.65.69 mvr vlan
- 4.2.65.70 network-clock synchronization ssm
- 4.2.65.71 no
- 4.2.65.72 ping ip
- 4.2.65.73 poe mode
- 4.2.65.74 poe pdcheck IP
- 4.2.65.75 poe pdcheck action
- 4.2.65.76 poe pdcheck enable
- 4.2.65.77 poe pdcheck interval
- 4.2.65.78 poe pdcheck reboot-time
- 4.2.65.79 poe pdcheck retry-count
- 4.2.65.80 poe power limit
- 4.2.65.81 poe priority
- 4.2.65.82 poe time-range
- 4.2.65.83 port-security
- 4.2.65.84 port-security maximum
- 4.2.65.85 port-security violation
- 4.2.65.86 port-security violation
- 4.2.65.87 pvlan
- 4.2.65.88 pvlan isolation
- 4.2.65.89 qos cos
- 4.2.65.90 qos dei
- 4.2.65.91 qos dpl
- 4.2.65.92 qos dscp-classify
- 4.2.65.93 qos dscp-remark
- 4.2.65.94 qos dscp-translate
- 4.2.65.95 qos map cos-tag
- 4.2.65.96 qos map tag-cos
- 4.2.65.97 qos pcp
- 4.2.65.98 qos policer
- 4.2.65.99 qos queue-policer queue
- 4.2.65.100 qos queue-shaper queue
- 4.2.65.101 qos shaper
- 4.2.65.102 qos storm broadcast
- 4.2.65.103 qos storm unicast
- 4.2.65.104 qos storm unknown
- 4.2.65.105 qos tag-remark
- 4.2.65.106 qos tag-remark mapped
- 4.2.65.107 qos trust dscp
- 4.2.65.108 qos trust tag
- 4.2.65.109 rmon collection history
- 4.2.65.110 rmon collection stats
- 4.2.65.111 shutdown
- 4.2.65.112 spanning-tree
- 4.2.65.113 spanning-tree auto-edge
- 4.2.65.114 spanning-tree bpdu-guard
- 4.2.65.115 spanning-tree edge
- 4.2.65.116 spanning-tree link-type
- 4.2.65.117 spanning-tree mst
cost - 4.2.65.118 spanning-tree mst
cost - 4.2.65.119 spanning-tree restricted-role
- 4.2.65.120 spanning-tree restricted-tcn
- 4.2.65.121 speed
- 4.2.65.122 switchport access vlan
- 4.2.65.123 switchport forbidden vlan add
- 4.2.65.124 switchport forbidden vlan remove
- 4.2.65.125 switchport hybrid acceptable-frame-type
- 4.2.65.126 switchport hybrid allowed vlan
- 4.2.65.127 switchport hybrid egress-tag
- 4.2.65.128 switchport hybrid ingress-filtering
- 4.2.65.129 switchport hybrid native vlan
- 4.2.65.130 switchport hybrid port-type
- 4.2.65.131 switchport mode
- 4.2.65.132 switchport vlan ip-subnet
- 4.2.65.133 switchport vlan mac
- 4.2.65.134 switchport vlan mapping
- 4.2.65.135 switchport vlan protocol group
- 4.2.65.136 switchport voice vlan discovery-protocol
- 4.2.65.137 switchport voice vlan mode
- 4.2.65.138 switchport voice vlan security
- 4.2.66 interface vlan
- 4.2.66.1 do
- 4.2.66.2 end
- 4.2.66.3 exit
- 4.2.66.4 ip address
- 4.2.66.5 ip address dhcp
- 4.2.66.6 ip address dhcp fallback
- 4.2.66.7 ip dhcp server
- 4.2.66.8 ip igmp snooping
- 4.2.66.9 ip igmp snooping compatibility
- 4.2.66.10 ip igmp snooping last-member-query-interval
- 4.2.66.11 ip igmp snooping priority
- 4.2.66.12 ip igmp snooping querier address
- 4.2.66.13 ip igmp snooping querier election
- 4.2.66.14 ip igmp snooping query-interval
- 4.2.66.15 ip igmp snooping query-max-response-time
- 4.2.66.16 ip igmp snooping robustness-variable
- 4.2.66.17 ip igmp snooping unsolicited-report-interval
- 4.2.66.18 ipv6 address
- 4.2.66.19 ipv6 mld snooping
- 4.2.66.20 ipv6 mld snooping compatibility
- 4.2.66.21 ipv6 mld snooping last-member-query-interval
- 4.2.66.22 ipv6 mld snooping priority
- 4.2.66.23 ipv6 mld snooping querier election
- 4.2.66.24 ipv6 mld snooping query-interval
- 4.2.66.25 ipv6 mld snooping query-max-response-time
- 4.2.66.26 ipv6 mld snooping robustness-variable
- 4.2.66.27 ipv6 mld snooping unsolicited-report-interval
- 4.2.66.28 no
- 4.2.67 ip arp inspection
- 4.2.68 ip arp inspection entry interface
- 4.2.69 ip arp inspection translate
- 4.2.70 ip arp inspection translate interface
- 4.2.71 ip arp inspection vlan
- 4.2.72 ip dhcp excluded-address
- 4.2.73 ip dhcp pool
- 4.2.73.1 broadcast
- 4.2.73.2 client-identifier fqdn
- 4.2.73.3 client-identifier mac-address
- 4.2.73.4 client-name
- 4.2.73.5 default-router
- 4.2.73.6 dns-server
- 4.2.73.7 do
- 4.2.73.8 domain-name
- 4.2.73.9 end
- 4.2.73.10 exit
- 4.2.73.11 hardware-address
- 4.2.73.12 host
- 4.2.73.13 lease
- 4.2.73.14 netbios-name-server
- 4.2.73.15 netbios-node-type
- 4.2.73.16 netbios-scope
- 4.2.73.17 network
- 4.2.73.18 nis-domain-name
- 4.2.73.19 nis-server
- 4.2.73.20 no
- 4.2.73.21 ntp-server
- 4.2.73.22 vendor
- 4.2.74 ip dns proxy
- 4.2.75 ip helper-address
- 4.2.76 ip http secure-redirect
- 4.2.77 ip http secure-server
- 4.2.78 ip igmp host-proxy
- 4.2.79 ip igmp host-proxy leave-proxy
- 4.2.80 ip igmp snooping
- 4.2.81 ip igmp snooping vlan
- 4.2.82 ip igmp ssm-range
- 4.2.83 ip igmp unknown-flooding
- 4.2.84 ip name-server
- 4.2.85 ip name-server dhcp
- 4.2.86 ip name-server dhcp interface vlan
- 4.2.87 ip route
- 4.2.88 ip routing
- 4.2.89 ip source binding interface
- 4.2.90 ip ssh
- 4.2.91 ip verify source
- 4.2.92 ip verify source translate
- 4.2.93 ipmc profile
- 4.2.94 ipmc profile
- 4.2.95 ipv6 mld host-proxy
- 4.2.96 ipv6 mld host-proxy leave-proxy
- 4.2.97 ipv6 mld snooping
- 4.2.98 ipv6 mld snooping vlan
- 4.2.99 ipv6 mld ssm-range
- 4.2.100 ipv6 mld unknown-flooding
- 4.2.101 ipv6 route
- 4.2.102 lacp system-priority
- 4.2.103 line
- 4.2.104 lldp holdtime
- 4.2.105 lldp med datum
- 4.2.106 lldp med fast
- 4.2.107 lldp med location-tlv altitude
- 4.2.108 lldp med location-tlv elin-addr
- 4.2.109 lldp med location-tlv latitude
- 4.2.110 lldp med location-tlv longitude
- 4.2.111 lldp med media-vlan-policy
- 4.2.112 lldp reinit
- 4.2.113 lldp timer
- 4.2.114 lldp transmission-delay
- 4.2.115 logging host
- 4.2.116 logging level
- 4.2.117 logging on
- 4.2.118 loop-protect
- 4.2.119 loop-protect shutdown-time
- 4.2.120 loop-protect transmit-time
- 4.2.121 mac address-table aging-time
- 4.2.122 mac address-table static
- 4.2.123 mep
ais - 4.2.124 mep
aps - 4.2.125 mep
cc - 4.2.126 mep
client domain - 4.2.127 mep
client flow - 4.2.128 mep
dm - 4.2.129 mep
dm ns - 4.2.130 mep
dm overflow-reset - 4.2.131 mep
dm proprietary - 4.2.132 mep
dm synchronized - 4.2.133 mep
down - 4.2.134 mep
lb - 4.2.135 mep
lck - 4.2.136 mep
level - 4.2.137 mep
lm - 4.2.138 mep
lt - 4.2.139 mep
meg-id - 4.2.140 mep
mep-id - 4.2.141 mep
peer-mep-id - 4.2.142 mep
performance-monitoring - 4.2.143 mep
tst - 4.2.144 mep
up - 4.2.145 mep
vid - 4.2.146 mep
voe - 4.2.147 monitor destination
- 4.2.148 monitor source
- 4.2.149 mvr
- 4.2.150 mvr name
channel - 4.2.151 mvr name
frame priority - 4.2.152 mvr name
frame tagged - 4.2.153 mvr name
igmp-address - 4.2.154 mvr name
last-member-query-interval - 4.2.155 mvr name
mode - 4.2.156 mvr vlan
- 4.2.157 mvr vlan
channel - 4.2.158 mvr vlan
frame priority - 4.2.159 mvr vlan
tagged - 4.2.160 mvr vlan
igmp-address - 4.2.161 mvr vlan
last-member-query-interval - 4.2.162 mvr vlan
mode - 4.2.163 mvr vlan
name - 4.2.164 network-clock clk-source
aneg-mode - 4.2.165 no
- 4.2.166 ntp
- 4.2.167 ntp server
- 4.2.168 poe admin-mode enable
- 4.2.169 poe management mode
- 4.2.170 poe sequential enable
- 4.2.171 poe sequential interval
- 4.2.172 poe sequential rule
- 4.2.173 poe supply
- 4.2.174 poe temperature-protection enable
- 4.2.175 poe temperature-threshold
- 4.2.176 poe usage-threshold
- 4.2.177 poe-time-range
- 4.2.178 port-security
- 4.2.179 port-security aging
- 4.2.180 port-security aging time
- 4.2.181 privilege
- 4.2.182 qos map cos-dscp
- 4.2.183 qos map dscp-classify
- 4.2.184 qos map dscp-cos
- 4.2.185 qos map dscp-egress-translation
- 4.2.186 qos map dscp-ingress-translation
- 4.2.187 qos qce
- 4.2.188 qos qce update
- 4.2.189 qos qce refresh
- 4.2.190 qos wred
- 4.2.191 radius-server attribute 32
- 4.2.192 radius-server attribute 4
- 4.2.193 radius-server attribute 95
- 4.2.194 radius-server deadtime
- 4.2.195 radius-server host
- 4.2.196 radius-server key
- 4.2.197 radius-server retransmit
- 4.2.198 radius-server timeout
- 4.2.199 rmon alarm
- 4.2.200 rmon event
- 4.2.201 sflow agent-ip
- 4.2.202 sflow collector-address
- 4.2.203 sflow collector-port
- 4.2.204 sflow max-datagram-size
- 4.2.205 sflow timeout
- 4.2.206 sfp temperature-threshold
- 4.2.207 snmp-server
- 4.2.208 snmp-server access
- 4.2.209 snmp-server community
- 4.2.210 snmp-server contact
- 4.2.211 snmp-server engine-id
- 4.2.212 snmp-server host
- 4.2.213 spanning-tree aggregation
- 4.2.213.1 do
- 4.2.213.2 end
- 4.2.213.3 exit
- 4.2.213.4 no
- 4.2.213.5 spanning-tree auto-edge
- 4.2.213.6 spanning-tree bpdu-guard
- 4.2.213.7 spanning-tree edge
- 4.2.213.8 spanning-tree link-type
- 4.2.213.9 spanning-tree mst
cost - 4.2.213.10 spanning-tree mst
port-priority - 4.2.213.11 spanning-tree restricted-role
- 4.2.213.12 spanning-tree restricted-tcn
- 4.2.214 switchport vlan mapping
- 4.2.215 tacacs-server deadtime
- 4.2.216 tacacs-server host
- 4.2.217 transport email authentication
- 4.2.218 transport email from
- 4.2.219 transport email smtp-server
- 4.2.220 transport email to
- 4.2.221 upnp
- 4.2.222 upnp advertising-duration
- 4.2.223 upnp ttl
- 4.2.224 username
- 4.2.225 vlan
- 4.2.226 vlan ethertype s-custom-port
- 4.2.227 vlan protocol
- 4.2.228 voice vlan
- 4.2.229 voice vlan aging-time
- 4.2.230 voice vlan class
- 4.2.231 voice vlan oui
- 4.2.232 voice vlan vid
- 4.2.233 web privilege group
- 4.3 copy
- 4.4 debug
- 4.5 delete
- 4.6 dir
- 4.7 disable
- 4.8 do
- 4.9 dot1x
- 4.10 enable
- 4.11 erps
- 4.12 exit
- 4.13 firmware
- 4.14 ip
- 4.15 logout
- 4.16 more
- 4.17 no
- 4.18 ping
- 4.19 reload
- 4.20 send
- 4.21 show
- 4.21.1 show aaa
- 4.21.2 show access management
- 4.21.3 show access-list
- 4.21.4 show access-list
- 4.21.5 show access-list ace-status
- 4.21.6 show aggregation
- 4.21.7 show aggregation mode
- 4.21.8 show clock
- 4.21.9 show clock detail
- 4.21.10 show dot1x statistics
- 4.21.11 show dot1x status
- 4.21.12 show eps
- 4.21.13 show erps
- 4.21.14 show evc
- 4.21.15 show evc statistics
- 4.21.16 show green-ethernet
- 4.21.17 show green-ethernet energy-detect
- 4.21.18 show green-ethernet short-reach
- 4.21.19 show history
- 4.21.20 show interface
capabilities - 4.21.21 show interface
statistics - 4.21.22 show interface
status - 4.21.23 show interface
switchport - 4.21.24 show interface
veriphy - 4.21.25 show interface
veriphy - 4.21.26 show interface vlan
- 4.21.27 show ip arp
- 4.21.28 show ip arp inspection
- 4.21.29 show ip arp inspection
- 4.21.30 show ip arp inspection entry
- 4.21.31 show ip dhcp detailed statistics
- 4.21.32 show ip dhcp excluded-address
- 4.21.33 show ip dhcp pool
- 4.21.34 show ip dhcp relay
- 4.21.35 show ip dhcp server
- 4.21.36 show ip dhcp server binding (GG)
- 4.21.37 show ip dhcp server declined-ip (GG)
- 4.21.38 show ip dhcp server statistics
- 4.21.39 show ip dhcp snooping
- 4.21.40 show ip dhcp snooping table
- 4.21.41 show ip http server secure status
- 4.21.42 show ip igmp snooping
- 4.21.43 show ip igmp snooping mrouter
- 4.21.44 show ip interface brief
- 4.21.45 show ip name-server
- 4.21.46 show ip route
- 4.21.47 show ip source binding
- 4.21.48 show ip ssh
- 4.21.49 show ip statistics
- 4.21.50 show ip verify source
- 4.21.51 show ipmc profile
- 4.21.52 show ipmc range
- 4.21.53 show ipv6 interface
- 4.21.54 show ipv6 mld snooping
- 4.21.55 show ipv6 mld snooping mrouter
- 4.21.56 show ipv6 neighbor
- 4.21.57 show ipv6 route
- 4.21.58 show ipv6 statistics
- 4.21.59 show lacp
- 4.21.60 show line
- 4.21.61 show lldp med media-vlan-policy
- 4.21.62 show lldp med remote-device
- 4.21.63 show lldp neighbors
- 4.21.64 show lldp statistics
- 4.21.65 show logging
- 4.21.66 show loop-protect
- 4.21.67 show mac address-table
- 4.21.68 show mep
- 4.21.69 show mvr
- 4.21.70 show network-clock
- 4.21.71 show ntp status
- 4.21.72 show platform phy
- 4.21.73 show platform phy failover
- 4.21.74 show platform phy id
- 4.21.75 show platform phy status
- 4.21.76 show port-security port
- 4.21.77 show port-security switch
- 4.21.78 show privilege
- 4.21.79 show pvlan
- 4.21.80 show pvlan isolation
- 4.21.81 show qos
- 4.21.82 show radius-server
- 4.21.83 show rmon alarm
- 4.21.84 show rmon event
- 4.21.85 show rmon history
- 4.21.86 show rmon statistics
- 4.21.87 show running-config
- 4.21.88 show snmp
- 4.21.89 show snmp access
- 4.21.90 show snmp community v3
- 4.21.91 show snmp host
- 4.21.92 show snmp mib context
- 4.21.93 show snmp mib ifmib ifIndex
- 4.21.94 show snmp security-to-group
- 4.21.95 show snmp user
- 4.21.96 show snmp view
- 4.21.97 show spanning-tree
- 4.21.98 show switchport forbidden
- 4.21.99 show tacacs-server
- 4.21.100 show terminal
- 4.21.101 show upnp
- 4.21.102 show users
- 4.21.103 show version
- 4.21.104 show vlan
- 4.21.105 show vlan ip-subnet
- 4.21.106 show vlan mac
- 4.21.107 show vlan protocol
- 4.21.108 show voice vlan
- 4.21.109 show web privilege group
- 4.22 terminal
- 4.1 clear
Command Guide
-24-
Chapter 2 CONSOLE CLI MANAGEMENT
2.1 Terminal Setup
To configure the system, connect a serial cable to a COM port on a PC or notebook computer and to RJ45 type of serial
(console) port of the Industrial Managed Switch.
Figure 2-1 Industrial Managed Switch Console Connectivity
The console port of the Industrial Managed Switch is an RJ45 type, RS-232 serial port connector. It is an interface for
connecting a terminal directly. Through the console port, it provides rich diagnostic information including IP address setting,
factory reset, port management, link status and system setting. Users can use the attached RS-232 cable in the package and
connect to the console port on the device. After the connection, users can run any terminal emulation program (Hyper Terminal,
ProComm Plus, Telix, Winterm and so on) to enter the startup screen of the device.
A terminal program is required to make the software connection to the Industrial Managed Switch. Windows' Hyper Terminal
program may be a good choice. The Hyper Terminal can be accessed from the Start menu.
1. Click START, then Programs and Accessories, and then Hyper Terminal.
2. When the following screen appears, make sure that the COM port should be configured as:
♦ Baud
: 115200
♦ Data bits
: 8
♦ Parity
: None
♦ Stop bits
: 1
♦ Flow control
: None