User's Manual

Command Guide
-256-
Default:
None
Usage Guide:
To configure Up-MEP of MEP.
Example:
To configure Up-MEP of MEP 2 as below table
Switch# configure terminal
Switch (config)#
mep 2 up domain port vid 1 flow 1 level 2 interface GigabitEthernet
1/1
4.2.145 mep <Instance> vid
Command:
mep <Instance> vid <vid>
mep Maintenance Entity Point
<Instance> The MEP instance number.
vid The MEP VID
<Vid : vlan_id> The MEP VID value
Default:
0
Usage Guide:
To set VID of MEP.
Example:
To set VID (8) of MEP 1.
Switch# configure terminal
Switch (config)# mep 1 vid 8
4.2.146 mep <Instance> voe
Command:
mep <Instance> voe
mep Maintenance Entity Point