User's Manual

Command Guide
-28-
Figure 3-3: Configuring IP Address Screen
4. Repeat step 1 to check if the IP address has changed.
 Storing current switch configuration
5. At the “#” prompt, enter the following command and press <Enter>.
# copy running-config startup-config
Figure 3-4: Saving Current Configuration Command Screen
If the IP is successfully configured, the Industrial Managed Switch will apply the new IP address setting immediately. You can
access the Web interface of the Industrial Managed Switch through the new IP address.
If you are not familiar with the console command or the related parameter, enter “ ?”
anytime
in console to get the help description.