User's Manual

Command Guide
-321-
4.2.224 username
Command:
username <username> privilege <priv> password {
encrypted <encry_password> |
none | unencrypted <password> }
username Establish User Name Authentication
<Username : word31> User name allows letters, numbers and underscores
privilege Set user privilege level
<privilegeLevel : 0-15> User privilege level
password Specify the password for the user
encrypted Specifies an ENCRYPTED password will follow
none NULL password
unencrypted Specifies an UNENCRYPTED password will follow
<Password : word4-44> The ENCRYPTED (hidden) user password. Notice the
ENCRYPTED password will be decoded by system internally. You cannot directly use it as
same as the Plain Text and it is not human-readable text
Default:
None
Usage Guide:
To configure the Profiles of Username
Example:
To configure the Profiles of Username (Username: 1234, Password: 1234, Privilege Level: 15)
Switch# configure terminal
Switch (config)# username 1234 privilege 15 password unencrypted 1234
Press ENTER to get started
Username: 1234
Password: 1234
#
4.2.225 vlan
Command:
vlan <vlist>
vlan VLAN commands
<vlan_list> VLAN IDs 1~4095