User's Manual

Command Guide
-333-
do < exec commands >
do To run exec commands.
Default:
N/A
Usage Guide:
To run exec commands.
Example:
To run “show aaa”.
Switch# do show aaa
console : local
telnet : local
ssh : local
http : local
4.9 dot1x
4.9.1 dot1x initialize
Command:
dot1x initialize [ interface ( <port_type> [ <plist> ] ) ]
dot1x IEEE Standard for port-based Network Access Control
initialize Force re-authentication immediately
Default:
N/A
Usage Guide:
To re-authenticate specific interface immediately.
Example:
To re-authenticate specific interface (GigabitEthernet 1/1) immediately.
Switch# dot1x initialize interface GigabitEthernet 1/1