User's Manual

Table Of Contents
Command Guide
-380-
Rcvd: 2618 Messages, 0 Error
Sent: 2618 Messages, 0 Error
ICMP message statistics:
IPv4 ICMP Message: Echo Reply
Rcvd: 0 Packet
Sent: 2618 Packets
IPv4 ICMP Message: Echo
Rcvd: 2618 Packets
Sent: 0 Packet
4.21.50 show ip verify source
Command:
show ip verify source [ interface ( <port_type> [ <port_type_list> ] ) ]
show Show running system information
ip Internet Protocol
verify verify command
source verify source
interface ip verify source interface config
Default:
N/A
Usage Guide:
To display the IP Source Guard configuration.
Example:
To display the IP Source Guard configuration for GigabitEthernet 1/1.
Switch # show ip verify source interface GigabitEthernet 1/1
Port Port Mode Dynamic Entry Limit
---- --------- -------------------
GigabitEthernet 1/1 enabled 1