User's Manual

Command Guide
-395-
4.21.69 show mvr
Command:
show mvr [ vlan <vlan_list> | name <mvr_name> ] [ group-
database [ interface
( <port_type> [ <port_type_list> ] ) ] [ sfm-information ] ] [ detail ]
show Show running system information
mvr Multicast VLAN Registration configuration
name Search by MVR name
vlan Search by VLAN
group-database Multicast group database from MVR
interface Search by port
sfm-information Including source filter multicast information from MVR
detail Detail information/statistics of MVR group database
Default:
N/A
Usage Guide:
To display the MVR information.
Example:
To display the MVR information.
Switch # show mvr
MVR is now enabled to start group registration.
Switch-1 MVR-IGMP Interface Status
IGMP MVR VLAN 1 (Name is 1) interface is enabled.
Querier status is IDLE
RX IGMP Query:0 V1Join:0 V2Join:0 V3Join:0 V2Leave:0
TX IGMP Query:0 / (Source) Specific Query:0
Interface Channel Profile: <No Associated Profile>
Switch-1 MVR-MLD Interface Status
MLD MVR VLAN 1 (Name is 1) interface is enabled.
Querier status is IDLE
RX MLD Query:0 V1Report:0 V2Report:0 V1Done:0
TX MLD Query:0 / (Source) Specific Query:0
Interface Channel Profile: <No Associated Profile>