User's Manual

Command Guide
-400-
Default:
N/A
Usage Guide:
To display the MAC Addresses of Port Security.
Example:
To display the MAC Addresses of Port Security.
Switch # show port-security port interface GigabitEthernet 1/1
GigabitEthernet 1/1
-------------------
MAC Address VID State Added Age/Hold Time
----------------- ---- ---------- ------------------------- -------------
<none>
4.21.77 show port-security switch
Command:
show port-security switch [ interface ( <port_type> [ <port_type_list> ] ) ]
show Show running system information
port-security port-security
switch Show Port Security status
interface Search by port
Default:
N/A
Usage Guide:
To display the status of Port Security.
Example:
To display the status of Port Security.
Switch # show port-security switch interface GigabitEthernet 1/1
Users:
L = Limit Control
8 = 802.1X
D = DHCP Snooping
V = Voice VLAN
Interface Users State MAC Cnt
----------------------- ----- ------------- -------
GigabitEthernet 1/1 ---- No users 0