User's Manual

Table Of Contents
Command Guide
-408-
Switch # show rmon statistics 1
Statistics ID : 1
---------------------
Data Source : .1.3.6.1.2.1.2.2.1.1.5
etherStatsDropEvents : 3
etherStatsOctets : 10221727
etherStatsPkts : 127086
etherStatsBroadcastPkts : 45280
etherStatsMulticastPkts : 70008
etherStatsCRCAlignErrors : 0
etherStatsUndersizePkts : 0
etherStatsOversizePkts : 0
etherStatsFragments : 0
etherStatsJabbers : 0
etherStatsCollisions : 0
etherStatsPkts64Octets : 26017
etherStatsPkts65to127Octets : 101063
etherStatsPkts128to255Octets : 5
etherStatsPkts256to511Octets : 1
etherStatsPkts512to1023Octets : 0
etherStatsPkts1024to1518Octets: 0
4.21.87 show running-config
Command:
show running-config [ all-defaults ] [feature <feature_name> [ all-
defaults ]]
[interface vlan <list> [ all-defaults ] ] [line { console | vty } <list> [ all-
defaults ]]
[vlan <list> [ all-defaults ]]
show Show running system information
running-config Show running system information
all-defaults Include most/all default values
feature Show configuration for specific feature
<feature_name> Valid words are 'GVRP' 'access' 'access-list' 'aggregation' 'arp-inspection' 'auth' 'clock' 'dhcp'
'dhcp-snooping''dhcp_server' 'dns' 'dot1x' 'eps' 'erps' 'evc' 'green-ethernet' 'http' 'icli'
'ip-igmp-snooping' 'ip-igmp-snooping-port' 'ip-igmp-snooping-vlan' 'ipmc-profile' 'ipmc-profile-range'
'ipv4' 'ipv6' 'ipv6-mld-snooping' 'ipv6-mld-snooping-port' 'ipv6-mld-snooping-vlan' 'lacp' 'link-oam'
'lldp' 'logging' 'loop-protect' 'mac' 'mep' 'monitor' 'mstp' 'mvr' 'mvr-port' 'network-clock' 'ntp' 'phy' 'poe'