User's Manual

User’s Manual of MGSW-28240F Managed switch
17
 Supports Spanning Tree Protocol
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
- BPDU Guard
 Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)
- Maximum 14 trunk groups, with 16 ports for each trunk group
- Up to 32Gbps bandwidth (full duplex mode)
 Provides port mirror (many-to-1)
 Port mirroring monitors the incoming or outgoing traffic on a particular port
 Loop protection to avoid broadcast loops
 Supports ERPS (Ethernet Ring Protection Switching)
 IEEE 1588 and Synchronous Ethernet network timing
 Quality of Service
■ Ingress Shaper and Egress Rate Limit per port bandwidth control
■ 8 priority queues on all switch ports
■ Traffic classification
- IEEE 802.1p CoS
- TOS/DSCP/IP Precedence of IPv4/IPv6 packets
- IP TCP/UDP port number
- Typical network application
■ Strict priority and Weighted Round Robin (WRR) CoS policies
■ Supports QoS and In/Out bandwidth control on each port
■ Traffic-policing on the switch port
■ DSCP remarking
 Multicast
 Supports IGMP snooping v1, v2 and v3
 Supports MLD snooping v1 and v2
 Querier mode support
 IGMP snooping port filtering
 MLD snooping port filtering
 MVR (Multicast VLAN Registration)
 Security
 Authentication
- IEEE 802.1x port-based/MAC-based network access authentication
- IEEE 802.1x authentication with guest VLAN
- Built-in RADIUS client to cooperate with the RADIUS servers
- RADIUS/TACACS+ users access authentication
 Access Control List
- IP-based Access Control List (ACL)