VDSL2 Modem VC-301 Quick Installation Guide
Package Contents The following items should be included: • VC-301 Unit • 1 RJ-45 (LAN) cable • 2 RJ-11 (VDSL2) cable • Power Adapter • VDSL Splitter • Quick Installation Guide If any of the above items are damaged or missing, please contact your dealer immediately.
Front Panel LED definition LED State Description PWR ON When the modem is powered on, and in ready state. OFF When the modem is powered off. Link Data LAN Flashing Modem is trying to establish a connection with telecom’s network. Reserved Function Future Feature Flashing/ON Data is being transmitted or received via the corresponding LAN port, and in ready state. Rear Panel Connector POWER Description Power connector with 5V DC 1.
Installation Procedure 1. Choose an Installation Site Select a suitable place to install the VC-301. 2. Connect RJ-45 Cable Uses the supplied RJ-45 cable connects to PC with the Ethernet port of VC-301. Both 10Base-T and 100Base-TX connections can be used simultaneously. If required, using a standard RJ-45 cable connect to Ethernet port of VC-301 with a normal Hub. Ethernet port of VC-301 will automatically function as an "Uplink" port when required. 3.
may cause hardware damage. 5. Check the LEDs • The PWR LED should be ON. • For LAN connection, the LAN LED should be ON (the provided PC is also ON.) • The Link LED should be ON if VDSL2 line is connected. Further Information If you have any other questions, please contact the dealer where you purchased this product or you can contact PLANET directly at the following email address: support@planet.com.
