Datasheet

NMS-500
PLANETreserves therighttochange specications withoutpriornotice.  Allbrandnames and trademarksareproperty of
their respective owners. Copyright © 2019 PLANET Technology Corp. All rights reserved.
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231,
Taiwan (R.O.C.)
Tel: [phone] Fax: [phone]
Email: [e-mail] www.planet.com.tw
PLANET Technology Corporation
NMS-500
5
Ordering Information
NMS-500 PLANET Enterprise-class Universal Network Management Controller
Related Products
VR-100 5-Port 10/100/1000T VPN Security Router
WGR-500-4PV Industrial Wall-mount Gigabit Router with 4-Port 802.3at PoE+ and LCD Touch Screen
IGS-6325-8UP2S2X
Industrial L3 8-Port 10/100/1000T 802.3bt PoE + 2-Port 100/1000X SFP + 2-Port 10G SFP+
Managed Ethernet Switch
GS-6320-24UP2T2XV
L3 24-Port 10/100/1000T 802.3bt PoE + 2-Port 10GBASE-T + 2-Port 10G SFP+
Managed Switch with LCD Touch Screen and Redundant Power
IGS-5225-8P2S2X
Industrial L3 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP + 2-Port 10G SFP+
Managed Ethernet Switch
GS-5220-24UPL4XV L2+ 24-Port 10/100/1000T Ultra PoE + 4-Port 10G SFP+ Managed Switch with LCD Touch Screen
WDAP-C7200E 1200Mbps 802.11ac Dual Band Ceiling-mount Wireless Access Point (802.3at PoE, 2 10/100/1000T LAN)
WNAP-W2200UE 300Mbps 802.11n In-Wall Wireless Access Point w/USB Charger (EU Type, 802.3af/at)
ICA-3460V H.265 4MP PoE Bullet IR IP Camera with Vari-focal Lens
ICA-4460V H.265 4MP PoE Dome IR IP Camera with Vari-focal Lens
Standards Compliance
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3x Flow control and back pressure
IEEE 802.3z Flow control with Rx thresholds and Tx pause frames
IEEE 1588 protocol and IEEE 802.1AS implementation
IEEE 802.3az (EEE)
[Remarks]
Router: Log in to the router’s Web user interface and enable the SNMP function.
Switch: Log in to the switch’s Web user interface and enable the SNMP and LLDP function.
AP: Log in to the AP’s Web user interface to conguretheAPto“ManagedAP”. In support of SNMP AP,
enable the SNMP function.
IP Cam: The ONVIF function is enabled by default.