User Manual

42 / 80
Main Menu – Control
 Procedure of profile provisioning to AP groups:
1. Select the AP group.
2. Click the “Apply” button.
3. Go to “3/Control-> AP Management” to check
whether the status is becoming “In progress”. Wait
until the status comes “Online”.
 On the AP Group Management page, you can
create AP group and control one or more AP groups.
 Add new group: Click it to add an AP group.
 Delete selected item: Click it to delete the
selected AP group.
 Apply: Click this button to apply the setting. The
profile setting will not take effect to a group until
you click the “Apply” button.
[3/Control - AP Group Management]
3.
 Action:
Setting: edit setting and allocate profile to group
Firmware Update : upgrade AP group’s firmware
Reboot: reboot the AP group
Delete: delete the AP group from the control list
LED Control: control the AP group’s LED.
Mouse-click in a sequential order:
LED blink-> LED off-> LED on
 Remarks:
To do profile provisioning to multiple AP groups at
one time, select multiple AP groups, and then click
the “Apply” button. The "Link" action is not
allowed for multiple APs or AP group.