User's Manual

NVR-820 / NVR-1620
Network Video Recorder with HDMI

13
Chapter 2. Hardware Interface
2.1 Physical Descriptions
Front Panel
NVR-1620
NVR-820
LED
Status Definitions
Green
Solid green - Normal operation
Slow blinking in green after pressing and holding the reset button
for 5 seconds indicates the device will enter the restore default
process. Other LEDs remain unchanged during this state.
Red System off (power cord remains plugged in)
Power
Amber
Fast blinking in amber during system initializing/starting.
Continuous blinking when system is unable to start properly (All
other LEDs should be off when this LED is blinking in amber)
Slow blinking indicates the system is shutting down.
Buttons
Status Definitions
ON Press and hold for 2 seconds
Power
OFF Press and hold for 2 seconds
Restore
default
Press and hold for 5 seconds
Reset
Restart Press and hold for 2 seconds
Buzzer
Status Definitions
Complete
start
Beep once (Indicating the system is starting)
Initiating
restart
Beep once (Indicating the restart process has begun)
Beep
Initiating
shutdown
Beep once (Indicating the Power button is to be released
as the shutdown process has begun)