User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Connecting to the NVR
- Chapter 4. Web-based Management
- Chapter 5. Playback Viewing
- Chapter 6. Event Viewing
- Chapter 7. NVR Setup – Device Configuration
- Chapter 8. NVR Setup -- Channel Configuration
- Chapter 9. NVR Setup -- Event Configuration
- Chapter 10. NVR Setup -- System Operations
- Chapter 11. NVR Local Interface
- 11.1 System Configuration
- 11.1.1 Service
- 11.1.2 Display
- 11.1.3 Network
- 11.1.4 User Account -- User setting
- 11.1.5 User Account -- User Group Setting
- 11.1.6 Disk
- 11.1.7 Channel Configurations -- Adding a Camera (Automatic Search)
- 11.1.8 Channel Configurations -- Adding a Camera (Add manually)
- 11.1.9 E-map
- 11.1.10 Recording
- 11.1.11 Event Setting
- 11.1.12 System Log
- 11.1.13 Maintenance
- 11.1.14 USB Backup
- 11.1 System Configuration
- Appendix A: Ping IP Address
- Appendix B: Planet DDNS Application
- Appendix C: Configuring Port Forwarding Manually
NVR-820 / NVR-1620
Network Video Recorder with HDMI
23
Chapter 4. Web-based Management
This chapter provides setup details of the Internet Camera’s Web-based Interface.
4.1 Main/Live Viewing
The main/live view is the first interface displayed once you access to the NVR through the
internet browser.
It displays the live video of all the cameras added to the NVR and following the pattern chosen
by the user. The interface has many functions explained below.
The “Live View” page provides the following functions:
• Retrieve camera’s video stream
• Retrieve camera’s status
• Perform Live Sequence Viewing
• PTZ Control (Click directly on the video)
• Perform PTZ Preset Sequence viewing
• Perform manual recording
• Take snapshot -
as soon as a snapshot selection is made, the snapshots are
automatically saved to x:\SnapshotFolder ("x" represents the partition where Windows is
installed, e.g., C:\)
• Receive audio of a video stream
• Send audio
• Control “Buzzer”
• Change web UI display language
The UI’s 5 main functions:
The bar displays the 5 main functions of the Web User Interface (UI).
The Live view is the main view .The other 4 views will be explained in each chapter.
4.1.1 Date and Time Display
The Date and the Time are defined by the user in the settings section of the NVR.