User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Connecting to the NVR
- Chapter 4. Web-based Management
- Chapter 5. Playback Viewing
- Chapter 6. Event Viewing
- Chapter 7. NVR Setup – Device Configuration
- Chapter 8. NVR Setup -- Channel Configuration
- Chapter 9. NVR Setup -- Event Configuration
- Chapter 10. NVR Setup -- System Operations
- Chapter 11. NVR Local Interface
- 11.1 System Configuration
- 11.1.1 Service
- 11.1.2 Display
- 11.1.3 Network
- 11.1.4 User Account -- User setting
- 11.1.5 User Account -- User Group Setting
- 11.1.6 Disk
- 11.1.7 Channel Configurations -- Adding a Camera (Automatic Search)
- 11.1.8 Channel Configurations -- Adding a Camera (Add manually)
- 11.1.9 E-map
- 11.1.10 Recording
- 11.1.11 Event Setting
- 11.1.12 System Log
- 11.1.13 Maintenance
- 11.1.14 USB Backup
- 11.1 System Configuration
- Appendix A: Ping IP Address
- Appendix B: Planet DDNS Application
- Appendix C: Configuring Port Forwarding Manually
NVR-820 / NVR-1620
Network Video Recorder with HDMI
25
If you click on the name of the user, the menu will display as shown below:
The camera menu offers the functions below:
- Digital Zoom
After clicking the digital zoom button, hold the mouse left button and draw a square on the video
to specify the zoom in area
Once the image is digitally zoomed in, use the mouse scroll button to further zoom on or zoom
out the image. Hold and left-click on the image and move the mouse to move the zoomed in
video.
- Take Snapshot 1 / 3
User can select 1 or 3 continuous snapshots. As soon as a snapshot selection is made, the
snapshots are automatically saved to x:\SnapshotFolder ("x" represents the partition where
Windows is installed, e.g. C:\)
If the "3 continuous snapshots" option is chosen, the new window will display snapshots where
you can view them individually by using the "Prev" and "Next" buttons as shown above.