User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Connecting to the NVR
- Chapter 4. Web-based Management
- Chapter 5. Playback Viewing
- Chapter 6. Event Viewing
- Chapter 7. NVR Setup – Device Configuration
- Chapter 8. NVR Setup -- Channel Configuration
- Chapter 9. NVR Setup -- Event Configuration
- Chapter 10. NVR Setup -- System Operations
- Chapter 11. NVR Local Interface
- 11.1 System Configuration
- 11.1.1 Service
- 11.1.2 Display
- 11.1.3 Network
- 11.1.4 User Account -- User setting
- 11.1.5 User Account -- User Group Setting
- 11.1.6 Disk
- 11.1.7 Channel Configurations -- Adding a Camera (Automatic Search)
- 11.1.8 Channel Configurations -- Adding a Camera (Add manually)
- 11.1.9 E-map
- 11.1.10 Recording
- 11.1.11 Event Setting
- 11.1.12 System Log
- 11.1.13 Maintenance
- 11.1.14 USB Backup
- 11.1 System Configuration
- Appendix A: Ping IP Address
- Appendix B: Planet DDNS Application
- Appendix C: Configuring Port Forwarding Manually
NVR-820 / NVR-1620
Network Video Recorder with HDMI
28
The channel status is defined by 3 colors:
- Red: The channel is recording and the live view is available
- Blue: The channel is connected and the live view is available
- Grey: The camera is disconnected
4.3.1 Pattern View
Different patterns of live view can be displayed on the video frame. You can display 1, 4, 9, or 16
cameras at once. Every time you click on an “n” pattern icon, the live video of the next “n”
camera will be displayed.
The channel spilt of the NVR-820 is 1, 4 and 8.
4.3.2 Sequence Viewing
The sequence mode will automatically switch between a single and group of cameras every a
certain period of time. You can define this period to 1 second to 60 seconds
4.3.3 Save Viewing
Click on the save view button and you will able to name the current view and save it.
This will help to quickly display your configured views when needed.