User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Connecting to the NVR
- Chapter 4. Web-based Management
- Chapter 5. Playback Viewing
- Chapter 6. Event Viewing
- Chapter 7. NVR Setup – Device Configuration
- Chapter 8. NVR Setup -- Channel Configuration
- Chapter 9. NVR Setup -- Event Configuration
- Chapter 10. NVR Setup -- System Operations
- Chapter 11. NVR Local Interface
- 11.1 System Configuration
- 11.1.1 Service
- 11.1.2 Display
- 11.1.3 Network
- 11.1.4 User Account -- User setting
- 11.1.5 User Account -- User Group Setting
- 11.1.6 Disk
- 11.1.7 Channel Configurations -- Adding a Camera (Automatic Search)
- 11.1.8 Channel Configurations -- Adding a Camera (Add manually)
- 11.1.9 E-map
- 11.1.10 Recording
- 11.1.11 Event Setting
- 11.1.12 System Log
- 11.1.13 Maintenance
- 11.1.14 USB Backup
- 11.1 System Configuration
- Appendix A: Ping IP Address
- Appendix B: Planet DDNS Application
- Appendix C: Configuring Port Forwarding Manually
NVR-820 / NVR-1620
Network Video Recorder with HDMI
66
On Web UI, the configuration can be backed up to or restore from a local computer.
Click “Backup” to store configuration file in local computer.
On local UI, the configuration can be backed up to or restore from a USB disk. It is required to
plug in a USB disk formatted in FAT32 prior to using the backup and restore functions.
Once it’s detected, click “Backup” to store configuration file in USB disk.
10.5 USB Backup
It’s a function that allows users to back up the recording data in its database file format as well
as in AVI to the externally-connected USB hard disk.
The USB hard disk(s) will be listed in the drop-down menu displaying the remaining disk space.
Make your selection from the drop-down menu if you have more than one disks connected to
the NVR.