User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Connecting to the NVR
- Chapter 4. Web-based Management
- Chapter 5. Playback Viewing
- Chapter 6. Event Viewing
- Chapter 7. NVR Setup – Device Configuration
- Chapter 8. NVR Setup -- Channel Configuration
- Chapter 9. NVR Setup -- Event Configuration
- Chapter 10. NVR Setup -- System Operations
- Chapter 11. NVR Local Interface
- 11.1 System Configuration
- 11.1.1 Service
- 11.1.2 Display
- 11.1.3 Network
- 11.1.4 User Account -- User setting
- 11.1.5 User Account -- User Group Setting
- 11.1.6 Disk
- 11.1.7 Channel Configurations -- Adding a Camera (Automatic Search)
- 11.1.8 Channel Configurations -- Adding a Camera (Add manually)
- 11.1.9 E-map
- 11.1.10 Recording
- 11.1.11 Event Setting
- 11.1.12 System Log
- 11.1.13 Maintenance
- 11.1.14 USB Backup
- 11.1 System Configuration
- Appendix A: Ping IP Address
- Appendix B: Planet DDNS Application
- Appendix C: Configuring Port Forwarding Manually
NVR-820 / NVR-1620
Network Video Recorder with HDMI
76
11.1.5 User Account -- User Group Setting
Group Privilege is where you can create multiple customized access policies for situations if
you need the recorder to be accessed by users other than the administrator. You can do so by
creating a group, and then remove access privileges for certain configuration pages or
cameras. Users that are created and assigned to this group will have limited access instead of
full administration rights.
The recorder comes with seven built-in groups and five built-in privilege profiles, except the
“admin” and the “guest” accounts; the other five groups are fully customizable or you can
simply assign a group with one of the default privilege profiles. You can, however, assign more
than one users to the “admin” account if you wish to do so. The guest account comes with a
“view-only” privilege on the “Live View” page, and users in this group do not have the power to
make any changes on the “Live View” page or have access to pages other than the “Live View”
page.
To create a group, select a group from the “Group” drop-down menu.
You can change the group name by typing in a new group name and click the “Change Group
Name” button to finish.