User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface
- Chapter 3. Connecting to the NVR
- Chapter 4. Web-based Management
- Chapter 5. Playback Viewing
- Chapter 6. Event Viewing
- Chapter 7. NVR Setup – Device Configuration
- Chapter 8. NVR Setup -- Channel Configuration
- Chapter 9. NVR Setup -- Event Configuration
- Chapter 10. NVR Setup -- System Operations
- Chapter 11. NVR Local Interface
- 11.1 System Configuration
- 11.1.1 Service
- 11.1.2 Display
- 11.1.3 Network
- 11.1.4 User Account -- User setting
- 11.1.5 User Account -- User Group Setting
- 11.1.6 Disk
- 11.1.7 Channel Configurations -- Adding a Camera (Automatic Search)
- 11.1.8 Channel Configurations -- Adding a Camera (Add manually)
- 11.1.9 E-map
- 11.1.10 Recording
- 11.1.11 Event Setting
- 11.1.12 System Log
- 11.1.13 Maintenance
- 11.1.14 USB Backup
- 11.1 System Configuration
- Appendix A: Ping IP Address
- Appendix B: Planet DDNS Application
- Appendix C: Configuring Port Forwarding Manually
NVR-820 / NVR-1620
Network Video Recorder with HDMI
99
Configure the start and end time of the recording data you would like to back up and click the
“Backup” button to begin.
Things to pay attention for the USB Backup function
Limitation:
• It does not support USB Hub, extending the number of HDDs connected to the
NVR.
• Only one backup process can be performed at a time.
• A maximum of 4 channels can be selected for backup.
• Only FAT32 USB hard disk is supported for backup.
• The USB hard disk needs to have more than 100MB remaining space.
• If multiple partitions are presented in one disk, only the first partition will be
detected and used for backup.
Process:
• Progress will be displayed on the UI.
• If the backup process gets interrupted, meaning the process stops before the
“END Time” user defined, such time will be displayed on the UI.
• A folder will be automatically created in the USB hard disk with a name format
like 0028687831_20100610151515_2010060511 0010_20100606110010
(MAC_backupbuttonclicktime_starttime_endtime).
Note:
• Please plug in the USB HDD only after the NVR is fully started, or the HDDs will
be incorrectly mounted.
• Play the backup files using the NVR media player.