64-Ch Windows-based NVR with 8-Bay Hard Disks NVR-E6480 Quick Installation Guide
Table of Contents Before You Start............................................................................................... 3 Package Contents............................................................................................. 4 1. Hardware Introductions................................................................................ 5 1.1 Physical Details.................................................................................... 5 1.2 Rackmount the Unit..............................
Before You Start Thank you for purchasing PLANET Windows-based Network Video Recorder. This guide contains all the information you need to quickly set up PLANET NVR system via local interface. For detailed instructions on installation, operation and how to log in to NVR as a web client, please refer to the product manual provided on PLANET website (http://www.planet.com.tw).
Package Contents zz 1 x NVR zz 1 x Power Cord zz 1 x QIG zz 1 x Universal Converter zz 1 x Front Cover zz 2 sets x HDD Tray Keys zz 1 set x Screws Storage hard disks are not included in the package contents.
1. Hardware Introductions 1.
1.2 Rackmount the Unit This unit is designed to be mounted on a standard server rack, which occupies 2U (3.5”) of vertical space. 1. Allow a minimum of 5 cm clearance at the front and the rear for front-to-back airflow of the unit. 2. Prepare a rack shelf rated for the unit’s weight or purchase the rail kit from PLANET, and install that to support the entire unit. 3. Secure the unit onto the rack. 1.
3. Loosen the two screws on the tray to remove the dummy disk. Secure the hard disk on the tray with the provided disk screws. Make sure the disk connector faces towards the SATA contacts inside the unit.
4. Place your thumb on the lock to push the tray into position in the chassis. 5. Press the hinge tab until it clicks into place. 1.4 Attach the Front Cover After you finish configuring NVR system, remember to lock the disk trays using the provided keys and attach the front cover to the unit’s front panel. 1. Align the left end hooks to the holes on the unit’s left handle.
2. Press the latch and push the right end towards the unit’s right handle until it clicks into place. 3. The NVR with the front cover is shown below. 1.5 Start Up 1. On the unit’s rear panel, press down the Power Switch to the side with “I” mark. 2. On the unit’s front panel, press down the Power Button to turn on the unit. 3. As this unit starts up, you will enter Windows logon screen, and input the password “admin” to log in as administrator.
2. System and Software Configuration 2.1 Create Disk Volumes Use Windows Disk Management to create disk volumes so that NVR can access the available storage space. 1. In Windows Search Box, search and enter “computer management”. 2. Select “Disk Management”, right-click on a disk title and select “Initialize Disk”; choose “GPT” as the partition style and click on “OK”.
3. Right-click on the initialized disk and select the volume type to make a new volume.
4. On New Volume Wizard window, make sure you assign the desired drive letter and give a proper label name to this volume. 5. After the volume is created, it is shown on volume list and is ready for recording. Note 12 To make a striped volume, a mirrored volume or a RAID-5 volume, it is recommended to select disks of the same model and capacity.
2.2 Log In On windows desktop, double-click on to enter NVR interface. Input the default account and password to log in. The default account and password are both “admin”. For security reasons, please remember to change it. 2.3 Create Users On NVR screen, click the Setup button to enter the Setup page and the Users tab. 1. Select “User Groups” and click “Add” to start adding a new user group. 2. Input group ID and click “Apply”.
3. Click on the title bar of Users panel and click “Add” to start adding a new user. 4. Input user’s Account Password and Email address, and select its User Group and then click “Apply”. 2.4 Select Storage Drives 1. Go to the Setup page and then the Storage tab. 2. On Disk Drive List, de-select C drive, and select other storage drives. 3. Click “Apply”.
2.5 Add Cameras 1. Go to the Setup page and then the Devices tab. 2. Click “Add”. 3. Choose a search method based on your network environment and camera brand. 2.6 Search Cameras Use “Search Cameras” to auto-search the network for PLANET cameras, or “Search ONVIF Cameras” for ONVIF-compliant cameras of any brand. After selecting your desired cameras, click “Apply”.
2.7 Add Camera Manually If you are adding a camera located in another network, use “Add Camera Manually”. Fill in Media Type, Protocol, IP Address, HTTP Port, Account and Password. Finally, click “Get Device Settings” and then “Apply”. 2.8 Configure Camera Settings 1. Go to the Setup page and then the Devices tab. Choose the camera from the Camera List. 2. Select Basic, Video, PTZ, or B tab to configure related settings. 3. Click “Apply” to save the settings.
2.9 Set Recording Schedule The recording service automatically starts full-time recording for a newly added camera. You can modify the recording schedule to suit your needs. 1. Go to the Setup page and the Schedule tab. Select the camera from the Camera List. 2. Choose a recording mode: Schedule Recording or Event Recording. Schedule Recording: Records video continuously during the scheduled session. Event Recording: Records video based on specific triggers such as when a motion is detected by the camera.
2.11 Validation To check live streaming of all channels, go to the Live View page and double-click on “All Cameras” on the Camera List. To check recording, go to the Playback page, and then select (double-click) a view from the View List or a camera from the Camera List. Drag on the time bar to see the recorded video.
3. Further Configuration For detailed configuration, please check user’s manual on our website. (http://www.planet.com.tw/en/support/download. php?model=48807&type=3#list) If you have any other question, please contact the dealer where you purchased this product or you can contact PLANET directly at the following email address: support_ica@planet.com.
