Datasheet

ManualsBrandsPLANET Technology ManualsPoE Injector Hubs12-Port Gigabit IEEE 802.3at PoE+ Managed Injector Hub (220 watts)

POE-1200G

12-Port Gigabit IEEE 802.3at PoE+ Managed Injector Hub (220 watts)

PLANET POE Managed PoE Injector Hub series, a cost-effective and quick PoE

solution, is designed to perfectly upgrade an existing network infrastructure to IEEE

802.3at Power over Ethernet Plus network system without replacing the existing

Ethernet Switch.

A Cost-effective Managed PoE+ Injector Hub

The POE-1200G is a high-density, rack-mountable managed PoE+ injector hub

featuring PLANET intelligent PoE functions through web user interface for

remote management. As its name implies, the unit can inject a total PoE budget of

220 watts into PDs. Its 12 10/100/1000BASE-T Ethernet ports can each deliver up

to 36 watts of power over Cat.5/5e/6 Ethernet UTP cables which allow data and

power to transmit simultaneously to remote 802.3at/af powered devices (PDs).

The POE-1200G enables centralization of the power supply and optimizes the

installation and power management of remote network devices, and provides

a quick, safe and cost-effective Power over Ethernet network solution for small

businesses and enterprises.

Interface

• 24-port RJ45

– 12-port 10/100/1000Mbps “Data input”

– 12-port 10/100/1000Mbps “Data + Power output”

• One 10/100/1000BASE-T management port

• Reset button for system management

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus mid-

span PSE

• Up to 12 IEEE 802.3at/802.3af devices powered

• 220-watt PoE budget

• Supports PoE power up to 30.8 watts (802.3at PoE+) /15.4

watts (802.3af PoE) for each PoE port

• Automatically detects PD

• Circuit protection prevents power interference between ports

• Remote power feeding up to 100m cable length

PoE Management

• Total PoE power budget control

• Per port PoE power schedule

• PoE function enable/disable

• Per port PoE function enable/disable

• PoE port power feeding priority

• PDclassicationdetection

• Over temperature protection

• PD alive check

Management

• Web interface for remote management

• Supports Network Time Protocol (NTP)

• Firmware upgrade through Web interface

• PLANETSmartDiscoveryutilityautomaticallyndsPLANET

devices on the network

• SNMPtrapforalarmnoticationofevents

• System log and remote syslog

Hardware

• 19-inch rack mountable; 1U height

• Reset button for resetting to default setting and system

reboot

• LED indicators for PoE ready and PoE activity

• LED indicators for power alert and fan alert

• FCC Part 15 Class A, CE

12-Port 36W “Data+Power” Output

802.3at/af PoE-in-Use LED

12-Port 10/100/1000 “Data” Input

10/100/1000

Management Port

Fan Failure LED

PoE Failure

LED

Power LED Reset Button

Summary of content (7 pages)

PAGE 1
POE-1200G 12-Port Gigabit IEEE 802.3at PoE+ Managed Injector Hub (220 watts) Interface • 24-port RJ45 –– 12-port 10/100/1000Mbps “Data input” –– 12-port 10/100/1000Mbps “Data + Power output” • One 10/100/1000BASE-T management port • Reset button for system management Power over Ethernet • Complies with IEEE 802.3at Power over Ethernet Plus midspan PSE • Up to 12 IEEE 802.3at/802.
PAGE 2
POE-1200G Quick and Easy PoE Network Deployment The POE-1200G is installed between a regular Ethernet Switch and the PDs. There are totally 24 RJ45 STP ports on the front panel of the POE-1200G, of which the 12 ports are on the lower stack functioned as "Data input" while the other 12 ports are on the upper stack functioned as "PoE (Data and Power) output". Both power and data are transferred simultaneously over the UTP cables to PDs without affecting the existing network performance and functions. 802.
PAGE 3
POE-1200G Friendly Web Management Interface To efficiently manage the powered devices, the POE-1200G provides simple Web management interface in which administrators can control the system and PoE functions for powered devices. It can automatically detect the power status of each port and show messages on its Web management interface. These features also provide users with a cost-effective way to manage the device via Internet whenever they are at work or at home.
PAGE 4
POE-1200G PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection on the Earth, the POE-1200G can effectively control the power supply besides its capability of giving high watts power. The built-in “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money.
PAGE 5
POE-1200G Applications Gigabit PoE Network Deployment The POE-1200G provides the easiest way to power your Ethernet devices such as IP camera on the ceiling and the wireless access point installed on the top of the building. With 12 10/100/1000BASE-T Gigabit Ethernet ports, the POE-1200G supports full 54V DC power for any remote IEEE 802.3af/IEEE 802.3at powered device (PD).
PAGE 6
POE-1200G Specifications POE-1200G Product Hardware Hardware Version Interface 5 “Data” Input Ports 12 x RJ45 “Data + Power” Output Ports 12 x RJ45 Management Port 1 x RJ45; 10/100/1000BASE-T, auto-negotiation, auto-MDI/MDIX Data Rate 10/100/1000Mbps System: SYS PWR x 1 (Green) PoE Failure x 1 (Red) Fan 1 Failure x 1 (Red) LED Fan 2 Failure x 1 (Red) Per PoE Port: PoE-in-use x 1 (Green) Management port: 1000 (Green), 10/100 (Orange) 10BASE-T: 4-pair UTP Cat5 up to 100m (328ft) Network Cable 1
PAGE 7
POE-1200G Environments Operating Storage Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 90% (non-condensing) Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 90% (non-condensing) Ordering Information POE-1200G 12-Port Gigabit IEEE 802.3at PoE+ Managed Injector Hub (220 watts) Related PoE Products HPOE-1200G 12-Port Gigabit IEEE 802.3at PoE+ Managed Injector Hub (360 watts) HPOE-2400G 24-Port Gigabit IEEE 802.